Cudy's CD-GP1200 is an xPON WiFi 5 router featuring 4-Stream dual-band WiFi 5, 1x SC/APC Slot, 4x Gigabit Ethernet Ports, GPON/EPON dual modes, CWMP, OMCI, 4-queue QoS, and Easy Mesh.

Specifications

Antenna Gain: 2x 5dBi
Beam-width: 360°
Data Rate: 2.4GHz: 300Mbps; 5.8GHz: 867Mbps; GPON: 2.488Gbps Downstream / 1.244Gbps Upstream
EPON: 1.25 Gbps Downstream / Upstream
Ethernet Ports: 4x 10/100/1000
Hardware Button: Power, Reset, WPS, Wi-Fi On/Off
Max. Power Consumption: 9.6W
Max Transmission Distance: 20km
Mounting: Desktop or Wall-mount
Operating System: Cudy
Operating Temperature: 0°C to 40°C
PoE Input: None
PoE Output: None
Power Input: 12V 1A Power Supply (Included)
Serial Interface: None
SIM Slots: None
Supported Voltage Range: 12V 1A
USB Ports: None
Wavelength: TX: 1310nm; RX: 1490nm
Dimensions: 173 × 123.8 × 33mm
Weight: 288g

Cudy's CD-GS105P is a 5 Port Gigabit switch with 4x 802.3af/at PoE ports, 1x Gigabit Uplink port and a 31W PoE Budget. Both VLAN and Extender modes are supported with the integrated toggle switch. VLAN mode enables port isolation on ports 1-4, while Extender mode increases the transmission distance on ports 1-4 to 250m at 10Mbps. The watchdog function continuously monitors PoE connections when enabled. If an error is detected on the device, the switch immediately restarts the port.

Specifications

Ethernet Ports: 5x 10/100/1000
Hardware Button: VLAN; Extender; Watchdog
Max. Power Consumption: 5W
Mounting: Desktop or Wall-Mount
Operating System: None
Operating Temperature: 0°C to 40°C
PoE Input: None
PoE Output: 802.3af/at PoE on Ports 1~4
Power Input: 1x IEC Power Cord (Included)
Serial Interface: None
SFP Ports: None
Supported Voltage Range: 100-240V
Dimensions: 119 x 85 x 28mm
Weight: 254g

MikroTik's RB-WAPLORA8 is an out-of-the-box Lora WAN gateway solution. This kit contains a pre-installed UDP packet forwarder to any public or private LoRa servers. It is an outdoor weatherproof wireless access point with 2.4GHz WLAN interface and Ethernet port that could be used as a back end.

SKU RB-WAPLORA8
Manufacturer MikroTik
Manufacturer Product Code RBwAPR-2nD&R11e-LR8G

Specifications

Antenna Gain: Lora: 2dBi Wireless: 2dBi
Beam-width: 360°
Data Rate: 2.4GHz: 300Mbps
Ethernet Ports: 1x 10/100
Hardware Button: Reset
Max. Power Consumption: 7W
Mounting: Desktop; Ceiling; Pole & Wall-Mount
Operating System: RouterOS (Level 4 Licence)
Operating Temperature: -40°C to 60°C
PoE Input: 9V-30V Passive PoE
PoE Output: None
Power Input: 24V 0.8A Power Supply (Included)
Serial Interface: None
SIM Slots: 1 Mini SIM
Supported Voltage Range: 9V-30V
USB Ports: None
Dimensions: 185 x 85 x 30mm

Cudy's CD-WR3600 is a dual-band Wi-Fi 7 (802.11be) 4 stream OFDMA router featuring MLO technology, 5x Gigabit Ethernet ports, and an aggregate data rate of up to 3600Mbps over its 2.4GHz (2x2 MU-MIMO) and 5GHz (2x2 MU-MIMO) radios. The router supports Cudy's whole home mesh system, DNS over TLS (DoT), and various VPN server or client protocols, as well as TR-069.

*Note: Easily manage this device on-site or remotely using the Cudy mobile app.

Specifications

Antenna Gain: 4x 5.5dBi
Beam-width: 360°
Data Rate: 2.4GHz: 688Mbps; 5GHz: 2882Mbps
Ethernet Ports: 5x 10/100/1000
Hardware Button: Reset; WPS
Max. Power Consumption: 9W
Mounting: Desktop or Wall-Mount
Operating System: Cudy
Operating Temperature: 0°C to 40°C
PoE Input: None
PoE Output: None
Power Input: 12V 1A Power Supply (Included)
Serial Interface: None
SIM Slots: None
Supported Voltage Range: 12V 1A
USB Ports: None
Dimensions: 330 x 256 x 60mm
Weight: 334g

Cudy's CD-WR6500 is a dual-band Wi-Fi 7 (802.11be) 6 stream OFDMA router featuring MLO technology, 5x Gigabit Ethernet ports, and an aggregate data rate of up to 6500Mbps over its 2.4GHz (2x2 MU-MIMO) and 5GHz (4x4 MU-MIMO) radios. The router supports DNS over TLS (DoT), and various VPN server or client protocols as well as TR-069 with Cudy's whole home mesh coming soon

*Note: Easily manage this device on-site or remotely using the Cudy mobile app.

Specifications

Antenna Gain: 6x 5.5dBi
Beam-width: 360°
Data Rate: 2.4GHz: 688Mbps; 5GHz: 5765Mbps
Ethernet Ports: 5x 10/100/1000
Hardware Button: Reset; WPS; Power
Max. Power Consumption: 17W
Mounting: Desktop or Wall-Mount
Operating System: Cudy
Operating Temperature: 0°C to 40°C
PoE Input: None
PoE Output: None
Power Input: 12V 1.5A Power Supply (Included)
Serial Interface: None
SIM Slots: None
Supported Voltage Range: 12V 1.5A
USB Ports: None
Dimensions: 431 x 324 x 58mm
Weight: 580g

MikroTik's RB-CAPLTE12AX is a Wi-Fi 6, indoor, ceiling mount Access Point with integrated LTE 12 modem. It features a quad-core 1.8GHz CPU, 2x Gigabit Ethernet Ports with PoE in and PoE out, and an aggregate Wi-Fi data rate of up to 1800Mbps and an LTE data rate of up to 600Mbps.

Specifications

Antenna Gain: 2.4GHz: 6dBi; 5.8GHz: 5.5dBi
Beam-width: 360°
Data Rate: LTE: 600Mbps Downlink; 150Mbps Uplink; Wireless: 2.4GHz: 574Mbps; 5.8GHz: 1200Mbps
Ethernet Ports: 2x 10/100/1000
Hardware Button: Reset
Max. Power Consumption: 13W
Mounting: Wall & Ceiling Mount
Operating System: RouterOS v7 only (Level 4 Licence)
Operating Temperature: -40°C to 50°C
PoE Input: 18V-57V (Passive PoE, 802.3af/at)
PoE Output: Passive PoE Pass-through Port 2
Power Input: 48V 0.95A Power Supply (Included)
Serial Interface: None
SIM Slots: 1x Micro SIM
Supported Voltage Range: 18V-57V
USB Ports: None
Other: None
Dimensions: 228 x 48 mm

MikroTik's RB-CSS326 is SwOS Cloud Smart Switch featuring 24x Gigabit Ethernet ports and 2x 10Gbps SFP+ 10Gbps ports. Powered by SwOS, the unit is configurable from a web browser and provides all the basic functionality of a managed switch. Additional features include port-to-port forwarding, MAC filters, VLANs, mirror traffic, applying bandwidth limitation and even adjusting some MAC and IP header fields

Specifications

Ethernet Ports: 24x 10/100/1000
Hardware Button: Reset
Max. Power Consumption: 19W
Mounting: Rack-Mount
Operating System: SwOS
Operating Temperature: -20°C to 70°C
PoE Input: 10V-30V (Passive PoE)
PoE Output: None
Power Input: 24V 1.2A Power Supply (Included)
Processor: Switch Chip
Serial Interface: None
SFP Ports: 2x 10Gbps
Supported Voltage Range: 10V-30V
System Memory: 2MB
USB Ports: None
Other: None
Dimensions: 440 x 144 x 44mm

MikroTik' s CRS326G is a Cloud Router Switch featuring 24x 2.5Gbps Ethernet Ports, 4x 10Gbps SFP+ Combo Ports (Either 2.5Gbps Ethernet or 10G SFP+), 2x QSFP+ 40Gbps Ports, as well as 1x RJ45 Console Port and 1x Gigabit port for management. The unit is equipped with dual power supplies for power redundancy.

Specifications

Ethernet Ports: 24x 10/100/1000/2500 (4x Combo Ports)
Hardware Button: Reset
Max. Power Consumption: 51W
Mounting: Rack-Mount
Operating System: RouterOS (Level 6 Licence)
Operating Temperature: -20°C to 60°C
PoE Input: None
PoE Output: None
Power Input: 2x IEC Power Cord (Included) (Dual Internal PSU)
Processor: 1 Core 650 MHz QCA9531
Serial Interface: 1x RJ45 Serial Port
SFP Ports: 4x 10Gbps (Combo Ports) ; 2x 40Gbps QSFP+
Supported Voltage Range: 100V-240V
System Memory: 128MB
USB Ports: None
Other: None
Dimensions: 443 x 258 x 44 mm

MikroTik's RB-CS318 is SwOS Cloud Smart Switch featuring 16x Gigabit Ethernet ports and 2x 10Gbps SFP+ ports. With its versatile mounting options and compact form factor, it can be installed in 10-inch racks, standard 19-inch racks, or even side-by-side - fitting two switches in a single 1U 19-inch space. Powered by SwOS, the unit is configurable from a web browser and provides all the basic functionality of a managed switch. Additional features include port-to-port forwarding, MAC filters, VLANs, mirror traffic, applying bandwidth limitation and even adjusting some MAC and IP header fields.

Specifications

Ethernet Ports: 16x 10/100/1000
Hardware Button: Reset
Max. Power Consumption: 10W
Mounting: Rackmount
Operating System: SwOS
Operating Temperature: -40°C to 70°C
PoE Input: None
PoE Output: None
Power Input: 1x Clover Power Cord (Included)
Processor: Switch Chip 98DX2518
Serial Interface: None
SFP Ports: 2x 10Gbps
Supported Voltage Range: 100-240V
System Memory: 16MB
USB Ports: None
Other: None
Dimensions: 218 x 157 x 44 mm

MikroTik's RB-CSS610 is a SwOS Lite Cloud Smart Switch featuring 8x Gigabit Ethernet ports, 2x 10Gbps SFP+ ports and can be powered by either DC Jack or 12-57V PoE. Powered by SwOS, the unit is configurable from a web browser and provides all the basic functionality of a managed switch. Additional features include port-to-port forwarding, MAC filters, VLANs, mirror traffic, applying bandwidth limitation and even adjusting some MAC and IP header fields.

Specifications

Ethernet Ports: 8x 10/100/1000
Hardware Button: Reset
Max. Power Consumption: 5W
Mounting: Rack-Mount
Operating System: SwOS Lite
Operating Temperature: -20°C to 60°C
PoE Input: 12V-57V (Passive PoE)
PoE Output: None
Power Input: 24V 0.8A Power Supply (Included)
Processor: Switch Chip
Serial Interface: None
SFP Ports: 2x 10Gbps
Supported Voltage Range: 12-57V
System Memory: 64KB
USB Ports: None
Other: None
Dimensions: 200 x 167 x 46 mm

MikroTik's RB-CSS610P is a SwOS Lite Cloud Smart Switch featuring 8x Gigabit PoE ports, 2x 10Gbps SFP+ ports and can be powered by either DC Jack or the included IEC power cord. The 8 Gigabit PoE ports offer both Passive PoE and auto-sensing 802.3af/at PoE. Powered by SwOS, the unit is configurable from a web browser and provides all the basic functionality of a managed switch as well as some additional features such as port-to-port forwarding, MAC filters, VLANs, mirror traffic, apply bandwidth limitation and even adjusting some MAC and IP header fields.

Specifications

Ethernet Ports: 8x 10/100/1000
Hardware Button: Reset
Max. Power Consumption: 12W
Mounting: Rack-Mount
Operating System: SwOS Lite
Operating Temperature: -40°C to 70°C
PoE Input: None
PoE Output: 802.3af/at or Passive PoE 18-57V
Power Input: 1x IEC Power Cable (Included) or 48-57V Power Supply (Not Included)
Processor: Switch Chip
Serial Interface: None
SFP Ports: 2x 10Gbps
Supported Voltage Range: 100-240V AC or 48-57V DC
System Memory: 64KB
USB Ports: None
Other: None
Dimensions: 272 x 216 x 50mm

MikroTik's RB-FTC21 is a weatherproof IP55 Fibre-to-Copper converter with smart management capabilities featuring 2x Gigabit Ethernet Ports and 1x 2.5Gbps SFP Port. The RB-FTC21 runs a full version of SwOS Lite, offering advanced management features and comes with everything you need for installation, including a 48V power adapter, a PoE injector, and a ceiling mount and fastening set.
SKU RB-FTC21
Manufacturer MikroTik
Manufacturer Product Code FTC21

Specifications

Ethernet Ports: 2x 10/100/1000
MaxPower Consumption: 3W
Operating Temperature: -40°C to 70°C
PoE Input: 24-57V (Passive PoE, 802.3af/at)
PoE Output: None
Power Input: 48V 0.95A Power Supply (Included)
SFP Ports: 1x 2.5Gbps
Supported Voltage Range: 24-57V DC & PoE
Dimensions: 254 x 97 x 35 mm

MikroTik's RB-GESP is an outdoor Gigabit Ethernet Surge Protector with a ground wire that supports Passive PoE and can be used to protect networks from lighting or surge damages. The unit comes with an IP67 outdoor enclosure and grounding cable. The maximum suggested cable length is 40 meters. For maximum protection, it is recommended to use an RB-GESP for outdoor connections and the RB-GESPIN at the other end for indoor connection.
SKU RB-GESP
Manufacturer MikroTik
Manufacturer Product Code RBGESP

Specifications

Data Line Protection: RJ45 10/100/1000 Ethernet
DC Spark-Over Voltage: 90V @ 100V/s
Discharge Current: 5kA (8/20μs)
Ethernet Ports:1x 10/100/1000
Maximum Impulse Spark-Over Voltage: 700V @ 1kV/µs
Operating Temperature: -40 to 70°C
PoE Support: Passive
Dimensions: 200 x 130 x 40mm

MikroTik's RB-GESPIN is an indoor Gigabit Passive PoE Injector with surge protection and ground wire that can be used to protect networks from lightning or surge damages. The maximum suggested cable length is 40 meters. For maximum protection, it is recommended to use an RB-GESP for outdoor connections and the RB-GESPIN at the other end, for indoor connection.
SKU RB-GESPIN
Manufacturer MikroTik
Manufacturer Product Code GESP+PoE-IN

Specifications

Data Line Protection: RJ45 10/100/1000 Ethernet
DC Spark-Over Voltage: 75V @ 100V/s
Discharge Current: 3kA (8/20μs)
Ethernet Ports: 1x 10/100/1000
Maximum Impulse Spark-Over Voltage: 700V @ 1kV/µs
Operating Temperature: -40 to 70°C
PoE Support: Passive
Dimensions: 200 x 130 x 40mm

MikroTik's RB-GPER is part of MikroTik's GPEN (Gigabit Passive Ethernet Network) range. This unit allows you to extend an Ethernet cable by up to 150m to network devices and up to 210m to another GPeR unit. The initial connection from the power source to GPeR should not exceed 100m but thereafter can be extended up to 210m to the next GPeR. Using multiple GPeR devices in line can allow up to 1.5km when using PoE.

NOTE: Jumper usage - If the destination device does not support PoE powering, the power passthrough can be disabled manually by removing both jumpers on the "PoE out" side. This will only work if "PoE in" is served by passive PoE source, as 802.3af/at switches will not be able to power the GPeR itself.
SKU RB-GPER
Manufacturer MikroTik
Manufacturer Product Code GPeR

Specifications

Ethernet Ports: 2x 10/100/1000
Hardware Button: None
Mounting: Wall-Mount
Operating System: None
Operating Temperature: -40°C to 70°C
PoE Input: 24V-57V Passive PoE, 802.3af/at
PoE Output: Jumper selectable passive PoE Passthrough
Power Input: 24V-57V Passive PoE, 802.3af/at
SFP Ports: None
Supported Voltage Range: 24V-57V
Dimensions: 114 x 50 x 25mm

MikroTik's RB-HEX is a five port Gigabit Ethernet router for locations where wireless connectivity is not required. The device has a full-size USB port, affordable, small and easy to use. It features a very powerful dual core 950MHz CPU and 512MB RAM, capable of all the advanced configurations supported by Router OS.

IPsec Hardware encryption (~470Mbps) and dude server package is also supported.

SKU RB-HEX
Manufacturer MikroTik
Manufacturer Product Code E50UG

Specifications

Ethernet Ports: 5x 10/100/1000
Hardware Button: Reset
Max. Power Consumption: 4W
Mounting: Desktop
Operating System: RouterOS (Level 4 Licence)
Operating Temperature: -40°C to 70°C
PoE Input: 12V-28V (Passive PoE)
PoE Output: None
Power Input: 24V 0.38A Power Supply (Included)
Processor: 2 Core 950MHz , EN7562CT
Serial Interface: None
SFP Ports: None
Supported Voltage Range: 12V-28V
System Memory: 512MB
USB Ports: 1x USB 2.0
Other: None
Dimensions: 113 x 89 x 28mm

MikroTik's RB-LHG60KIT is an outdoor, high-speed pre-paired 60GHz kit enabling you to establish a cost-effective, secure (AES Encrypted), Point-to-Point link in the clean 60GHz wireless spectrum at a distance of up to 1.5km. It is equipped with a Gigabit Ethernet port for high-speed connections and shipped with an LHG mount and Aim tool for precision alignment.

SKU RB-LHG60KIT
Manufacturer MikroTik
Manufacturer Product Code RBLHGG-60adkit

Specifications

Antenna Gain: Maximum of 42dBi
Beam-width: 3°
Data Rate: 60GHz: 1Gbps
Ethernet Ports: 1x 10/100/1000
Hardware Button: Reset
Max. Power Consumption: 7W
Mounting: Pole-Mount
Operating System: RouterOS (Level 3 license)
Operating Temperature: -40°C to 70°C
PoE Input: 12V-57V (Passive PoE; 802.3af/at)
PoE Output: None
Power Input: 24V 0.38A Power Supply (Included)
Serial Interface: None
SIM Slots: None
Supported Voltage Range: 12V-57V
USB Ports: None
Dimensions: Ø 391 x 222mm

MikroTik's RB-LHGHP5XL4 offers 4x RB-LHGHP5XL units in a single package. The RB-LHGHP5XL is an extra-large, high power, 5GHz CPE with an integrated 27dBi antenna, 1x Fast Ethernet Port and up to 300Mbps data rate.

SKU RB-LHGHP5XL4
Manufacturer MikroTik
Manufacturer Product Code RBLHG-5HPnD-XL4pack

Specifications

Antenna Gain: 27dBi
Beam-width: 6.4°
Data Rate: 5.8GHz: 300Mbps
Ethernet Ports: 1x 10/100
Hardware Button: Reset
Max. Power Consumption: 7W
Mounting: Pole-Mount
Operating System: RouterOS (Level 3 license)
Operating Temperature: -40°C to 70°C
PoE Input: 10-30V (Passive PoE)
PoE Output: None
Power Input: 24V 0.38A Power Supply (Included)
Serial Interface: None
SIM Slots: None
Supported Voltage Range: 10-30V
USB Ports: None
Dimensions: Ø 550 x 245 mm

MikroTik's RB-LTAP is a small weatherproof wireless access point with integrated LTE antennas and a mini-PCI-e slot.

The LTAP mini has one 10/100 Ethernet LAN port for your wired devices, and an RS232 serial port gives you console access for debugging. The unit has several powering options: 8-30V via the DC Jack, Passive and 803.3af PoE via the Ethernet port or power it up using the 5V micro-USB.

LTAP mini has a special enclosure with a wall mounting kit, two SIM slots to alternate between cellular providers, and integrated GPS support, making this a perfect device for use in moving vehicles like cars, buses or trains. Use the built-in GPS module to track the location of your vehicle in real time.

Combine this with an ANT-MLTE to improve signal and performance or RB-GPS for use as a tracking solution.

*Note: The second SIM slot is for scripted failover configurations only. It does not automatically failover or do load balancing.

SKU RB-LTAP
Manufacturer MikroTik
Manufacturer Product Code RB912R-2nD-LTm&EC200A

Specifications

Antenna Gain: LTE: 3.5dBi (with UFL connector); Wireless: 1.5dBi
Beam-width: 360°
Data Rate: LTE: 150Mbps Downlink; 50Mbps Uplink ; Wireless: 2.4GHz 300Mbps
Ethernet Ports: 1x 10/100
Hardware Button: Reset; Mode
Max. Power Consumption: 9W
Mounting: Wall-Mount
Operating System: RouterOS (Level 4 Licence)
Operating Temperature: -40°C to 70°C
PoE Input: 10V-57V (Passive PoE and 802.3af/at)
PoE Output: None
Power Input: 24V 1.2A Power Supply (Included)
Serial Interface: 1x RS232
SIM Slots: 2 Mini SIM slots
Supported Voltage Range: PoE in: 10V-57V (Passive PoE and 802.3af/at with unshielded cable) DC jack: 8V-30V or Micro USB: 5V
USB Ports: None
Dimensions: 139 x 77 x 28.5mm

MikroTik's RB-MANTBOX12 is a long-range, 12dbi, 120° integrated Base Station for 2.4 GHz. Powered by the RB911 device, the RB-MANTBOX12 comes ready-to-use with everything included. This device uses a high-speed 600Mhz CPU, comes with a Gigabit Ethernet Port and built-in 802.11b/g/n wireless device with 30 dBm output power.

SKU RB-MANTBOX12
Manufacturer MikroTik
Manufacturer Product Code RB911G-2HPnD-12S

Specifications

Antenna Gain: 12dBi
Beam-width: 120°
Data Rate: 2.4GHz 300Mbps
Ethernet Ports: 1x 10/100/1000
Hardware Button: Reset
Max. Power Consumption: 11W
Mounting: Pole-Mount
Operating System: RouterOS (Level 4 Licence)
Operating Temperature: -40°C to 70°C
PoE Input: 10V-28V (Passive PoE)
PoE Output: None
Power Input: 24V 0.8A Power Supply (Included)
Serial Interface: None
SIM Slots: None
Supported Voltage Range: 8V-30V
USB Ports: None
Other: None
Dimensions: 140 x 348 x 82mm