Cudy's CD-GS1024 is a 24 Port Gigabit Switch that supports both desktop and rack-mount options. It features a toggle switch with VLAN, Extender and Default modes. In Default mode all ports operate freely. VLAN mode enables port isolation on ports 1-22 while Extender mode increases the transmission distance on ports 1-22 to 250m at 10Mbps.
Ethernet Ports: 24x 10/100/1000
Hardware Button: None
Max. Power Consumption: 15W
Mounting: Desktop or Rack-Mount
Operating System: None
Operating Temperature: 0°C to 40°C
PoE Input: None
PoE Output: None
Power Input: 1x IEC Power Cord (Included)
Serial Interface: None
SFP Ports: None
Supported Voltage Range: 100V-240V

Dimensions: 270 x 180 x 44mm

Provide a variety of installation methods for easy deployment in any environment
● Support 11-inch Rack-mount Steel Case
● Support Desktop installation

High Performance
Auto-negotiation RJ-45 ports can provide large file transferring and also be compatible with any 10/100/1000Mbps Ethernet devices. IEEE 802.3x flow control for Full Duplex mode and backpressure for Half Duplex mode offer increased bandwidth to alleviate network congestion, making the switch work reliably.

Power Saving
Save power up to 40% - The GS1024 uses green Ethernet technology to make your network compatible without compromising performance. The switch automatically powers down the ports that are idle and budgets power output for different Ethernet cable lengths. It helps you save power up to 40%.


Features
Complies with IEEE 802.3, IEEE 802.3u, IEEE802.3x and IEEE 802.3ab standards
24 10/100/1000Mbps Auto-Negotiation, Auto-MDI/MDIX ports provide smart switching between 10Mbps, 100Mbps and 1000Mbps hardware
Non-blocking switching architecture enables full wire-speed packets forwarding and filtering
Store-and-Forward switching method
Supports 16K MAC address auto-learning and auto-agin

Fanvil's FAN-W610W features a 2.0” colour screen, IEEE802.11k/v/r roaming, built in Bluetooth and dual band WiFi with up to 9 hours of talk time. The FAN-W610W is compatible with major platforms such as 3CX, Broadsoft, Elastix, Asterisk, Xorcom and others.
Bluetooth Support: Integrated Bluetooth 5.0
Ethernet Ports: None
Battery Capacity: 1900mAH Rechargable
Headset Port: Compatible with Bluetooth 5.0
Mounting: Desktop
Operating Temperature: 0°C to 45°C
PoE Input: None
Power Input: 5V 2A Power Supply (Included)
SIP Lines: 4
WiFi Support: Dual Band WiFi 4

Dimensions: 156 x 53 x 17.7 mm
Weight: 147g

Fanvil's FAN-V61G features dual Gigabit Ethernet ports, 4 SIP lines, HD Voice, Opus support, a 6-way conference function, integrated hall switch and a 2.4' colour LCD display. The FAN-V61G is compatible with major platforms such as 3CX, Broadsoft, Elastix, Asterisk, Xorcom, etc.

*Note: Designed for use with a PoE switch or injector (not included). Alternatively, use with PSU-5V10W DC power supply, sold separately.
Bluetooth Support: None
Ethernet Ports: 2x 10/100/1000
Max Power Consumption: 6.7W
Headset Port: 1x RJ9
Mounting: Desktop
Operating Temperature: 0°C to 45°C
PoE Input: 802.3af/at PoE
Power Input: 5V 1A (Not included) or 802.3af/at PoE
SIP Lines: 4
WiFi Support: None

Dimensions: 295 x 222 x 56 mm

Fanvil's FAN-X303 features dual Fast Ethernet ports, 4 SIP lines, HD Voice, IPv4/IPv6, Opus support, a 3-way conference function and a 2.4' colour LCD display. The FAN-X303 is compatible with major platforms such as 3CX, Broadsoft, Elastix, Asterisk, Xorcom, etc.

*Note: This IP Phone is not compatible with PoE. A 5V 0.6A Power Supply is included.
Bluetooth Support: None
Ethernet Ports: 2x 10/100

Max Power Consumption: 2.09W
Headset Port: 1x RJ9
Mounting: Desktop or Wall-Mount when used with FAN-WB108
Operating Temperature: 0°C to 45°C
PoE Input: None
Power Input: 5V 0.6A Power Supply (Included)
SIP Lines: 4
WiFi Support: None

Dimensions: 169 x 201.1 x 177.4 mm

Fanvil's FAN-V61W is a WiFi 6 desktop phone featuring dual Gigabit Ethernet ports, 4 SIP lines, Bluetooth & Opus support, integrated hall switch and a 2.4' colour LCD display. The FAN-V61W is compatible with major platforms such as 3CX, Broadsoft, Elastix, Asterisk, Xorcom, etc.

*Note: Designed for use with a PoE switch or injector (not included). Alternatively, use with PSU-5V10W DC power supply, sold separately.
Bluetooth Support: Bluetooth 5.4
Ethernet Ports: 2x 10/100/1000
Max Power Consumption: 6.7W
Headset Port: 1x RJ9
Mounting: Desktop
Operating Temperature: 0°C to 45°C
PoE Input: 802.3af/at PoE
Power Input: 5V 1A (Not included) or 802.3af/at PoE
SIP Lines: 4
WiFi Support: Dual Band WiFi 6

Dimensions: 295 x 222 x 56 mm

Fanvil's FAN-X303P features dual Fast Ethernet ports, 4 SIP lines, HD Voice, IPv4/IPv6, Opus support, a 3-way conference function and an easy-to-read lattice display. The FAN-X303P is compatible with major platforms such as 3CX, Broadsoft, Elastix, Asterisk, Xorcom, etc.

*Note: Designed for use with a PoE switch or injector (not included). Alternatively, use with PSU-5V10W DC power supply, sold separately.
Bluetooth Support: None
Ethernet Ports: 2x 10/100

Max Power Consumption: 2.09W
Headset Port: 1x RJ9
Mounting: Desktop or Wall-Mount when used with FAN-WB108
Operating Temperature: 0°C to 45°C
PoE Input: 802.3af/at PoE
Power Input: 5V 0.6A (Not included) or 802.3af/at PoE
SIP Lines: 4
WiFi Support: None

Dimensions: 169 x 201.1 x 177.4 mm

Fanvil's FAN-X301G features dual Gigabit Ethernet ports, 2 SIP lines, HD Voice, IPv4/IPv6, Opus support, a 3-way conference function and an easy-to-read lattice display. The FAN-X301G is compatible with major platforms such as 3CX, Broadsoft, Elastix, Asterisk, Xorcom, etc.

*Note: Designed for use with a PoE switch or injector (not included). Alternatively, use with PSU-5V10W DC power supply, sold separately.
Bluetooth Support: None
Ethernet Ports: 2x 10/100/1000
Max Power Consumption: 1.86W
Headset Port: 1x RJ9
Mounting: Desktop or Wall-Mount when used with FAN-WB108
Operating Temperature: 0°C to 45°C
PoE Input: 802.3af/at PoE
Power Input: 5V 0.6A (Not included) or 802.3af/at PoE
SIP Lines: 2
WiFi Support: None

Dimensions: 169 x 201.1 x 177.4 mm

Fanvil's FAN-X301 features dual Fast Ethernet ports, 2 SIP lines, HD Voice, IPv4/IPv6, Opus support, a 3-way conference function and an easy-to-read lattice display. The FAN-X301 is compatible with major platforms such as 3CX, Broadsoft, Elastix, Asterisk, Xorcom, etc.

*Note: This IP phone is not compatible with PoE. A 5V 0.6A power supply is included.
Bluetooth Support: None
Ethernet Ports: 2x 10/100
Max Power Consumption: 1.86W
Headset Port: 1x RJ9
Mounting: Desktop or Wall-Mount when used with FAN-WB108
Operating Temperature: 0°C to 45°C
PoE Input: None
Power Input: 5V 0.6A Power Supply (Included)
SIP Lines: 2
WiFi Support: None

Dimensions: 169 x 201.1 x 177.4 mm

Fanvil's FAN-X301P features dual Fast Ethernet ports, 2 SIP lines, HD Voice, IPv4/IPv6, Opus support, a 3-way conference function and an easy-to-read lattice display. The FAN-X301P is compatible with major platforms such as 3CX, Broadsoft, Elastix, Asterisk, Xorcom, etc.

*Note: Designed for use with a PoE switch or injector (not included). Alternatively, use with PSU-5V10W DC power supply, sold separately.
Bluetooth Support: None
Ethernet Ports: 2x 10/100
Max Power Consumption: 1.86W
Headset Port: 1x RJ9
Mounting: Desktop or Wall-Mount when used with FAN-WB108
Operating Temperature: 0°C to 45°C
PoE Input: 802.3af/at PoE
Power Input: 5V 0.6A (Not included) or 802.3af/at PoE
SIP Lines: 2
WiFi Support: None

Dimensions: 169 x 201.1 x 177.4 mm

Fanvil's FAN-V62G features dual Gigabit Ethernet ports, 802.3af/at PoE support, 12 SIP lines, HD Audio, and a 2.8' colour LCD screen. The FAN-V62G is compatible with major platforms such as 3CX, Broadsoft, Elastix, Asterisk, Xorcom, etc.

*Note: PSU-5V10W power supply not included.

Bluetooth Support: None
Ethernet Ports: 2x 10/100/1000
Max Power Consumption: 6.7W
Headset Port: 1x RJ9
Mounting: Desktop
Operating Temperature: 0°C to 45°C
PoE Input: 802.3af/at
Power Input: 5V 1A (Not included) or 802.3af/at PoE
SIP Lines: 12
WiFi Support: None

Dimensions: 295 x 222 x 56 mm

Fanvil's FAN-X4U features dual Gigabit Ethernet ports, 802.3af/at PoE, 12 SIP lines, HD Audio with Opus support, a 2.8' main colour LCD screen as well as a 2.4' DSS colour display. The unit also makes provision for WiFi and Bluetooth connections via external dongles (not Included). The FAN-X4U is compatible with major platforms such as 3CX, Broadsoft, Elastix, Asterisk, Xorcom, etc.

*Note: PSU-5V10W power supply not included.
Bluetooth Support: External Dongle (Not Included)
Ethernet Ports: 2x 10/100/1000
Max Power Consumption: 10.46W
Headset Port: 1x RJ9
Mounting: Desktop
Operating Temperature: 0°C to 45°C
PoE Input: 802.3af/at PoE
Power Input: 5V 2A (Not included) or 802.3af/at PoE
SIP Lines: 12
WiFi Support: External Dongle (Not Included)

Dimensions: 315 x 228 x 84 mm

Fanvil's FAN-V62W is a WiFi 6 desktop phone featuring dual Gigabit Ethernet ports, 12 SIP lines, Bluetooth & Opus support, integrated hall switch and a 2.8' colour LCD display. The FAN-V62W is compatible with major platforms such as 3CX, Broadsoft, Elastix, Asterisk, Xorcom, etc.

*Note: Designed for use with a PoE switch or injector (not included). Alternatively, use with PSU-5V10W DC power supply, sold separately.
Bluetooth Support: Bluetooth 5.4
Ethernet Ports: 2x 10/100/1000
Max Power Consumption: 6.7W
Headset Port: 1x RJ9
Mounting: Desktop
Operating Temperature: 0°C to 45°C
PoE Input: 802.3af/at PoE
Power Input: 5V 1A (Not included) or 802.3af/at PoE
SIP Lines: 12
WiFi Support: Dual Band WiFi 6

Dimensions: 295 x 222 x 56 mm

8 Independent 100MPS POE ports; Video Content Analytics; 1-Ch Audio input; HDMI and VGA output at up to 1920×1080P; 1x SATA interface(Up to 6TB); Mini 1U case; 12VDC
Description
NVR-108-B
8-ch Mini 1U 4 PoE 4K NVR
Connectable to the third-party network cameras
Up to 8 network cameras can be connected
H.264+ compression effectively reduces the storage space and costs by up to 50%
Full channel recording at up to 4 MP resolution
HDMI/VGA output at 1080p resolution
2-ch playback at 4 MP resolution or 4-ch at 1080p resolution
1 SATA hard disk can be connected with 6TB capacity
HDD quota management: different capacity can be assigned to different channel
Supports line crossing detection and intrusion detection
Smart search for the selected area in the video; and smart playback to improve the
playback efficiency
One-key operation: automatically search, modify and add IP cameras after device is
activated
Hik-Connect and DyDDNS for easy network management
100 Mbps Ethernet network interface

General
Power supply48 VDC
Working temperature-10 °C to +55 °C (14 °F to 131 °F)
Working humidity10 % to 90 %
Consumption (without hard disk and PoE)≤ 10 W
Chassis1U chassis
Dimensions(W × D × H)285 × 215 × 48 mm(11.2" × 8.5" × 1.9")
Weight(without hard disk)≤ 1 kg (2.2 lb)

MikroTik's RB-LHG60 is an outdoor, high-speed 60GHz CPE unit which, can be used to form either a Point-to-Point or Point-to-Multipoint link in the clean 60GHz spectrum. Pair up to 8 units with a MikroTik 60GHz Access Point or create a PtP link at a distance of up to 1.5km. The unit is equipped with a Gigabit Ethernet Port for high-speed connections and is shipped with an LHG mount and aim tool for precision alignment.
Antenna Gain: Maximum of 42dBi
Beam-width: 3°
Data Rate: 60GHz: 1Gbps
Ethernet Ports: 1x 10/100/1000
Hardware Button: Reset
Max. Power Consumption: 7W
Mounting: Pole-Mount
Operating System: RouterOS (Level 3 license)
Operating Temperature: -40°C to 70°C
PoE Input: 12V-57V (Passive PoE; 802.3af/at)
PoE Output: None
Power Input: 24V 0.38A Power Supply (Included)
Serial Interface: None
SIM Slots: None
Supported Voltage Range: 12V-57V
USB Ports: None

Dimensions: Ø 391 x 222mm

MikroTik 8port PoE Smart Switch (RBCRS112-8P-4S-IN)

The MikroTik CRS112-8P-4S-IN is an eight Gigabit RJ45 ports PoE switch, that offers different power output options: autosensing 802.3af/at PoE/PoE+ and Passive PoE, and four SFP ports provide optical fiber connectivity options to support uplinks of up to 1 Gbps.

CRS112-8P-4S-IN is equipped with 12 independent switching ports. 28 V 3.4 A power supply is already included in the box. There is secondary DC jack on the back of the enclosure that supports 48-57 V power supply (not included). CRS112-8P-4S-IN can power 802.3af/at devices if 48-57 V DC input is used (unit will automatically detect and provide correct power to devices). Max current is 1 A per port if input voltage is 18-28 V, 450 mA if 48-57 V. Total limit is 2.8A@24V and 1.4A@48-57V

The MikroTik CRS series combines a fully functional router and a managable switch with L3 features, it’s powered by the familiar RouterOS. All the specific Switch configuration options are available in a special Switch menu, but if you want, ports can be removed from the switch configuration, and used for routing purposes. It gives you all the basic functionality for a managed switch, plus more: allows to manage port-to-port forwarding, apply MAC filter, configure VLANs, mirror traffic, apply bandwidth limitation and even adjust some MAC and IP header fields. IGMP snooping is also supported.

Switching Features:

Non-blocking Layer 2 switching capacity
16K host table
IEEE 802.1Q VLAN
Supports up to 4K simultaneous VLANs
Port isolation
Port security
Broadcast storm control
Port mirroring of ingress/egress traffic
Rapid Spanning Tree Protocol
Access Control List
MikroTik neighbor discovery
SNMP
9204-byte jumbo frames support
IGMP snooping
static link aggregation

Quick Specifications:

8 Gigabit RJ45 Ports
4 SFP Ports
Non-Blocking Throughput: 12 Gbps
Switching Capacity: 24 Gbps
Forwarding Rate: 17.8 Mpps
Maximum Power Consumption: 10 W (without PoE devices connected)
Supports PoE+ IEEE 802.3at/af and 24 V Passive PoE
Quiet, Fanless Operation
Desktop-Rackmount

Weight & Dimensions
W : 24cm
L : 31cm
H : 20cm
Weight : 550g

MikroTik's RB-4011SRM is a 4 core rack-mount router featuring 10x Gigabit Ethernet Ports, 1x 10Gbps SFP+ port and IPsec hardware acceleration. It is powered by either Passive PoE or DC Jack and can provide PoE Passthrough on Port 10.

*Note: The RB-4011SRM does not support Passive DAC's, 1GB copper SFP modules or SFP GPON modules. It is compatible with our SFP-AOC5.
Ethernet Ports: 10x 10/100/1000
Hardware Button: Reset
Max. Power Consumption: 18W
Mounting: Desktop & Rack-Mount
Operating System: RouterOS (Level 5 Licence)
Operating Temperature: -40°C to 70°C
PoE Input: 18V-57V (Passive PoE)
PoE Output: 18V-57V Passive PoE on Port 10 (Max 600mA @ 18-30V & 420mA @ 30-57V)
Power Input: 24V 1.5A Power Supply (Included)
Processor: 4 Core, Up to 1.4GHz AL21400
Serial Interface:1x RJ45 Serial Port
SFP Ports: 1x 10Gbps
Supported Voltage Range: 12V-57V
System Memory: 1GB
USB Ports: None
Other: None

Dimensions: 228 x 120 x 30m

MikroTik Wireless Wire Dish (LHG 60GHz Kit)

The Wireless Wire Dish is a groundbreaking solution which offers Fiber speed and quality on distances up to 1500 m for a fraction of the price!

This amazing kit makes a secure AES encrypted 60 GHz wireless link that is not affected by the crowded WiFi spectrum, offering a stable and fast link for distances of 1500 meters or more. Simply point the included devices at one another and power them on, they are already preconfigured to connect automatically and will make a 2 Gb/s aggregate link.

The box includes two LHGG-60ad devices that are already paired together, power supplies, PoE injectors and mounting kits for both devices.

Specifications Antenna Gain: Maximum of 42dBi
Beam-width: 3°
Data Rate: 60GHz: 1Gbps
Ethernet Ports: 1x 10/100/1000
Hardware Button: Reset
Max. Power Consumption: 7W
Mounting: Pole-Mount
Operating System: RouterOS (Level 3 license)
Operating Temperature: -40°C to 70°C
PoE Input: 12V-57V (Passive PoE; 802.3af/at)
PoE Output: None
Power Input: 24V 0.38A Power Supply (Included)
Serial Interface: None
SIM Slots: None
Supported Voltage Range: 12V-57V
USB Ports: None

Dimensions: Ø 391 x 222mm

HiLook 24-Port 100 Mbps Long-Range Unmanaged PoE Switch
Unmanaged switch with 24 x 100 Mbps PoE ports, 1 x 1000 Mbps RJ45 port, and 1 x 1000 Mbps SFP port
All ports support 6 kV lighting protection
230 W PoE power budget
Maximum transmission distance is 250 meters for port 17 to 24 in "extend" mode
MAC address auto learning and auto aging

Port number24 × 100 Mbps PoE ports, 1 × 1000 Mbps RJ45 port, and 1 × 1000 Mbps SFP fiber optical port
Port typeRJ45 port, full duplex, MDI/MDI-X adaptive
Standard IEEE 802.3, IEEE 802.3u, IEEE 802.3x
Forwarding mode Store-and-forward switching
Working mode Standard mode (default); Extend mode
High priority ports Ports 1 to 8
Ports for long-distance transmission Ports 17 to 24
MAC address table4 K
Switching capacity8.8 Gbps
Packet forwarding rate6.547 Mpps
Internal cache2.75 Mbits
PoE standard IEEE 802.3af, IEEE 802.3at
PoE power pin
Ports for long-distance transmission (17-24) support 8-core power supply, Ethernet cable 1/2/3/6 and 4/5/7/8 provide simultaneous power supply.
Ports for close-range transmission (1-8) support 4-core power supply, Ethernet cable 1/2/3/6 provide power supply.
PoE port Ports 1 to 24
Max. port power30 W
PoE power budget230 W
Max. power consumption250 W
Shell Metal material
Gross weight3.33 kg (7.34 lb)
Net weight2.55 kg (5.6 lb)
Dimension (L × H × D)335 mm × 44.5 mm × 226 mm (13.2” × 1.8” × 8.9”)
Operating temperature-10 °C to 55 °C (14 °F to 131 °F)
Storage temperature-40 °C to 85 °C (-40 °F to 185 °F)
Operating humidity5% to 95% (no condensation)
Storage humidity5% to 95% (no condensation)
Power supply100 to 240 VAC, 50/60 Hz, Max. 4 A
Power consumption in idle20 W

16 Port Fast Ethernet Unmanaged POE Switch
Unmanaged switch with 16 x 100 Mbps PoE ports, 1 x 1000 Mbps RJ45 port, and 1 x 1000 Mbps SFP port
All ports support 6 kV lighting protection
130 W PoE power budget
Maximum transmission distance is 250 meters for port 9 to 16 in "extend" mode
MAC address auto learning and auto aging
General
Shell Metal material
Operating temperature-10 °C to 55 °C (14 °F to 131 °F)
Storage temperature-40 °C to 85 °C (-40 °F to 185 °F)
Power supply100 to 240 VAC, 50/60 Hz, Max. 2.5 A
Storage humidity5% to 95% (no condensation)
Net weight1.8 kg (4.0 lb)
Gross weight2.58 kg (5.69 lb)
Dimension (L × H × D)266 mm × 44.5 mm × 220.8 mm (10.5” × 1.8” × 8.7”)
Operating humidity5% to 95% (no condensation)
Power consumption in idle20 W

Network parameters
Port number16 × 100 Mbps PoE ports, 1 × 1000 Mbps RJ45 port, and 1 × 1000 Mbps SFP fiber optical port
Port typeRJ45 port, full duplex, MDI/MDI-X adaptive
Standard IEEE 802.3, IEEE 802.3u, IEEE 802.3x
Forwarding mode Store-and-forward switching
Working mode Standard mode (default); Extend mode
MAC address table4 K
Switching capacity7.2 Gbps
Packet forwarding rate5.356 Mpps
Internal cache2.75 Mbits
High priority ports Ports 1 to 8
Ports for long-distance transmission Ports 9 to 16
PoE power supply
PoE standard IEEE 802.3af, IEEE 802.3at
PoE power pin
Ports for long-distance transmission (9-16) support 8-core power supply, Ethernet cable 1/2/3/6 and 4/5/7/8 provide simultaneous power supply.
Ports for close-range transmission (1-8) support 4-core power supply, Ethernet cable 1/2/3/6 provide power supply.
PoE portPorts 1 to 16
Max. port power30 W
PoE power budget130 W
Max. power consumption150 W

8 Port Fast Ethernet Unmanaged POE Switch

Unmanaged switch with 8 x 100 Mbps PoE ports, 1 x 100 Mbps RJ45 port
All ports support 6 kV lighting protection
60 W PoE power budget
Maximum transmission distance is 250 meters for port 1 to 8 in "extend" mode
MAC address auto learning and auto aging
General
Shell Metal material, fan-free design
Operating temperature-10 °C to 55 °C (14 °F to 131 °F)
Storage temperature-40 °C to 85 °C (-40 °F to 185 °F)
Power supply48 VDC, 1.35 A
Storage humidity5% to 95% (no condensation)
Net weight0.35 kg (0.77 lb)
Gross weight0.89 kg (1.96 lb)
Dimension (L × H × D)170 mm × 27.6 mm × 93.1 mm (6.7” × 1.1” × 3.7”)
Operating humidity5% to 95% (no condensation)
Power consumption in idle5 W
Network parameters
Port number8 × 100 Mbps PoE ports, 1 × 100 Mbps Ethernet port
Port typeRJ45 port, full duplex, MDI/MDI-X adaptive
Standard IEEE 802.3, IEEE 802.3u, IEEE 802.3x
Forwarding mode Store-and-forward switching
Working mode Standard mode (default); Extend mode
MAC address table2 K
Switching capacity1.8 Gbps
Packet forwarding rate1.339 Mpps
Internal cache1 Mbits
High priority ports Ports 1 to 2
Ports for long-distance transmission Ports 1 to 8