Smart Tech, Home & Business Solutions – Quickstore South Africa

MikroTik's RB-GROOVEA52 is a small, outdoor, fully-featured wireless RouterBOARD powered by RouterOS. It is weatherproof, durable and ready to use. It has one 10/100 Ethernet port with PoE support and a built-in wireless radio. The RB-GROOVEA52 has software selectable 2 or 5GHz wireless mode, and 500mW output power. The GrooveA52 model has 64MB of RAM and RouterOS license (support for AP, point-to-point or CPE)

With the Nv2 TDMA technology, up to 125Mbit aggregate throughput is possible. It has a built-in N-male connector, and pole attachment points, so you can attach it directly to an antenna, or you can use a standard antenna cable. LED signal indicators assist with installation and alignment.

Box contains: Groove unit, mounting loops, PoE injector, power adapter, Omni antenna

Specifications

Antenna Gain: 2.4GHz/5.8GHz: 6dBi / 8dBi (Detachable)
Beam-width: Antenna Dependent
Data Rate: 2.4GHz/5GHz: 150Mbps
Ethernet Ports: 1x 10/100
Hardware Button: Reset
Max. Power Consumption: 6W
Mounting: Pole-Mount
Operating System: RouterOS (Level 4 Licence)
Operating Temperature: -40°C to 70°C
PoE Input: 9V-30V (Passive PoE)
PoE Output: None
Power Input: 24V 0.8A Power Supply (Included)
Serial Interface: None
SIM Slots: None
Supported Voltage Range: 9V-30V
USB Ports: None
Dimensions: 177 x 44 x 44mm

MikroTik's RB-GPERO is a sturdy and affordable outdoor enclosure for the RB-GPER unit which can easily be mounted on walls and poles.
SKU RB-GPERO
Manufacturer MikroTik
Manufacturer Product Code GPeR-IP67-Case
GPEN Concept
Specifications IP67 Weatherproof Enclosure

MikroTik's RB-GESPIN is an indoor Gigabit Passive PoE Injector with surge protection and ground wire that can be used to protect networks from lightning or surge damages. The maximum suggested cable length is 40 meters. For maximum protection, it is recommended to use an RB-GESP for outdoor connections and the RB-GESPIN at the other end, for indoor connection.
SKU RB-GESPIN
Manufacturer MikroTik
Manufacturer Product Code GESP+PoE-IN

Specifications

Data Line Protection: RJ45 10/100/1000 Ethernet
DC Spark-Over Voltage: 75V @ 100V/s
Discharge Current: 3kA (8/20μs)
Ethernet Ports: 1x 10/100/1000
Maximum Impulse Spark-Over Voltage: 700V @ 1kV/µs
Operating Temperature: -40 to 70°C
PoE Support: Passive
Dimensions: 200 x 130 x 40mm

MikroTik's RB-TAG-IN is a slim Indoor IoT Bluetooth tag with built in accelerometer. Ideal for indoor tracking with the MikroTik KNOT or other IoT asset-tracking installations.

SKU RB-TAG-IN
Manufacturer MikroTik
Manufacturer Product Code TG-BT5-IN

Specifications

Antenna Gain: 1.5dBi
Battery: 220 mAh
Beam-width: 360°
Bluetooth Version: 5.2
Operating Temperature: 0°C to 70°C
Rating: IP55
Sensors: Accelerometer
Dimensions: 37 x 22 x 6 mm
Weight: 7g

MikroTik's RB-LHG5-3 offers 3x RB-LHG5 units in a single package. The RB-LHG5 is a compact and light 5GHz 802.11a/n wireless device with an integrated dual polarization 24.5 dBi grid antenna. It is ideal for point-to-point links or for use as a CPE at longer distances and supports Nv2 TDMA protocol. The grid design ensures protection against wind, and the fact that the antenna element is built into the wireless unit means no loss on cables. The RB-LHG5 supports 5150MHz-5875MHz frequency range.

The 3-pack saves on packing space and is therefore ideal for orders where courier costs are a consideration.

SKU RB-LHG5-3
Manufacturer MikroTik
Manufacturer Product Code RBLHG5kit

Specifications

Antenna Gain: 24.5dBi
Beam-width: 7°
Data Rate: 5.8GHz: 300Mbps
Ethernet Ports: 1x 10/100
Hardware Button: Reset
Max. Power Consumption: 6W
Mounting: Pole-Mount
Operating System: RouterOS (Level 3 license)
Operating Temperature: -40°C to 70°C
PoE Input: 11V - 30V (Passive PoE)
PoE Output: None
Power Input: 24V 0.38A Power Supply (Included)
Serial Interface: None
SIM Slots: None
Supported Voltage Range: 11V-30V
USB Ports: None
Dimensions: Ø 391 x 222 mm

MikroTik's RB-LHG60 is an outdoor, high-speed 60GHz CPE unit which, can be used to form either a Point-to-Point or Point-to-Multipoint link in the clean 60GHz spectrum. Pair up to 8 units with a MikroTik 60GHz Access Point or create a PtP link at a distance of up to 1.5km. The unit is equipped with a Gigabit Ethernet Port for high-speed connections and is shipped with an LHG mount and aim tool for precision alignment.
Antenna Gain: Maximum of 42dBi
Beam-width: 3°
Data Rate: 60GHz: 1Gbps
Ethernet Ports: 1x 10/100/1000
Hardware Button: Reset
Max. Power Consumption: 7W
Mounting: Pole-Mount
Operating System: RouterOS (Level 3 license)
Operating Temperature: -40°C to 70°C
PoE Input: 12V-57V (Passive PoE; 802.3af/at)
PoE Output: None
Power Input: 24V 0.38A Power Supply (Included)
Serial Interface: None
SIM Slots: None
Supported Voltage Range: 12V-57V
USB Ports: None

Dimensions: Ø 391 x 222mm

MikroTik's RB-LHGLTE6 is ideal for remote locations within cellular network coverage. Mount it outdoors, on a pole, mast or any tall structure, to enable connection even where cell phones fail. Due to its large-sized, high-gain antenna, the RB-LHGLTE6 kit can connect to cell towers in extremely rural locations, giving you the ability to provide last mile internet access where nothing else is available.

The RB-LHGLTE6 kit features a Cat6 LTE modem which enables carrier aggregation, allowing a device to use multiple bands simultaneously - A great advantage when there are multiple LTE users in the area. It provides better responsiveness in a crowded environment and higher efficiency in weaker signal situations.

SKU RB-LHGLTE6
Manufacturer MikroTik
Manufacturer Product Code LHGGR&FG621-EA

Specifications

Antenna Gain: LTE 17dBi
Beam-width: 25°
Data Rate: 300 Mbps Downlink; 50 Mbps Uplink
Ethernet Ports: 1x 10/100/1000
Hardware Button: Reset
Max. Power Consumption: 6W
Mounting: Pole-Mount
Operating System: RouterOS (Level 3 License)
Operating Temperature: -30°C to 70°C
PoE Input: 12V – 57V (Passive PoE; 802.3af/at)
PoE Output: None
Power Input: 24V 0.38A Power Supply (Included)
Serial Interface: None
SIM Slots: 1 (Micro SIM)
Supported Voltage Range: 12V-57V
USB Ports: None
Dimensions: 391 x 391 x 227 mm

MikroTik's RB-LHGM Mount is a basic pole mount adapter for the LHG series. The bracket features a simple and low-cost design and supports all LHG series, products, including the LHG XL.

SKU RB-LHGM
Manufacturer MikroTik
Manufacturer Product Code LHGMount

Specifications

Adjustment Angle: Vertical
Compatible Mikrotik devices: LHG series
Material: Metal
Dimensions: 95 x 88 x 108mm

MikroTik's RB-LHGSM is an advanced pole mount adapter manufactured from high-strength metal. The solid MOUNT is compatible with all LHG series products and allows for both vertical and horizontal adjustments. The unit includes a U-bolt and mounting kit.

SKU RB-LHGSM
Manufacturer MikroTik
Manufacturer Product Code solid MOUNT

Specifications

Adjustment Angle: Vertical & Horizontal (Fine tune)
Compatible MikroTik Devices: LHG Series
Material: Metal
Dimensions: 91 x 93 x 169mm

MikroTik's RB-LHG60KIT is an outdoor, high-speed pre-paired 60GHz kit enabling you to establish a cost-effective, secure (AES Encrypted), Point-to-Point link in the clean 60GHz wireless spectrum at a distance of up to 1.5km. It is equipped with a Gigabit Ethernet port for high-speed connections and shipped with an LHG mount and Aim tool for precision alignment.

SKU RB-LHG60KIT
Manufacturer MikroTik
Manufacturer Product Code RBLHGG-60adkit

Specifications

Antenna Gain: Maximum of 42dBi
Beam-width: 3°
Data Rate: 60GHz: 1Gbps
Ethernet Ports: 1x 10/100/1000
Hardware Button: Reset
Max. Power Consumption: 7W
Mounting: Pole-Mount
Operating System: RouterOS (Level 3 license)
Operating Temperature: -40°C to 70°C
PoE Input: 12V-57V (Passive PoE; 802.3af/at)
PoE Output: None
Power Input: 24V 0.38A Power Supply (Included)
Serial Interface: None
SIM Slots: None
Supported Voltage Range: 12V-57V
USB Ports: None
Dimensions: Ø 391 x 222mm

MikroTik's RB-LHG5ACXL4 is a 4-pack option featuring a long-range 5GHz 802.11ac (WiFi 5) wireless radio with an integrated 27dBi grid antenna. The RB-LHG5ACXL4 is ideal for point-to-point links or for use as a CPE at longer distances.
SKU RB-LHG5ACXL4
Manufacturer MikroTik
Manufacturer Product Code RBLHGG-5acD-XL4pack

Specifications

Antenna Gain: 27dBi
Beam-width: 7°
Data Rate: 5.8GHz: 867Mbps
Ethernet Ports: 1x 10/100/1000
Hardware Button: Reset
Max. Power Consumption: 7W
Mounting: Pole Mount
Operating System: Router OS (Level 3 License)
Operating Temperature: -40°C to 70°C
PoE Input: 10-30V (Passive PoE)
PoE Output: None
Power Input: 24V 0.38A Power Supply (Included)
Serial Interface: None
SIM Slots: None
Supported Voltage Range: 10-30V
USB Ports: None
Dimensions: Ø 550 x 245 mm

MikroTik's RB-LHGHP5XL4 offers 4x RB-LHGHP5XL units in a single package. The RB-LHGHP5XL is an extra-large, high power, 5GHz CPE with an integrated 27dBi antenna, 1x Fast Ethernet Port and up to 300Mbps data rate.

SKU RB-LHGHP5XL4
Manufacturer MikroTik
Manufacturer Product Code RBLHG-5HPnD-XL4pack

Specifications

Antenna Gain: 27dBi
Beam-width: 6.4°
Data Rate: 5.8GHz: 300Mbps
Ethernet Ports: 1x 10/100
Hardware Button: Reset
Max. Power Consumption: 7W
Mounting: Pole-Mount
Operating System: RouterOS (Level 3 license)
Operating Temperature: -40°C to 70°C
PoE Input: 10-30V (Passive PoE)
PoE Output: None
Power Input: 24V 0.38A Power Supply (Included)
Serial Interface: None
SIM Slots: None
Supported Voltage Range: 10-30V
USB Ports: None
Dimensions: Ø 550 x 245 mm

MikroTik's ANT-LORA is a 6.5 dBi Omni Antenna for the 824-928MHz frequency range. This device includes a 1m SMA cable and a mechanical holder for quick and easy mounting on masts 25-50mm.

Specifications

Antenna Gain: 6.5dBi (868 MHz) / 4.5dBi (915 MHz)
Beam-width: Horizontal: 360° Vertical: 30°
Connector: Antenna: 1x SMA Female
Frequency Range: 824 - 928 MHz
Polarization: Vertical & Horizontal
Dimensions: 42 x 68 x 495 mm
Weight: 600g

MikroTik's RB-LTAPHDLTE6 is a compact, 4G capable, weatherproof, wireless access point – ideal for a busy, urban environment or off-the-grid outdoor networking. It has a built-in Cat6 cellular modem that supports 4G connectivity out of the box with up to 300 Mbps download speed. LTE6 also enables carrier aggregation and allows the device to use multiple bands simultaneously, which is a great advantage when there are many LTE users in the area.

*Note: To make use of more than 1 SIM at a time, a second PCI LTE module is required.

SKU RB-LTAPHDLTE6
Manufacturer MikroTik
Manufacturer Product Code LtAP-2HnD&FG621-EA

Specifications

Antenna Gain: LTE: 4dBi (with UFL connector); Wireless: 2.5dBi
Beam-width: 360°
Data Rate: LTE: 300Mbps Downlink; 50Mbps Uplink; Wireless: 2.4GHz 300Mbps
Ethernet Ports: 1x 10/100/1000
Hardware Button: Reset
Max. Power Consumption: 24W
Mounting: Wall-Mount
Operating System: RouterOS (Level 4 License)
Operating Temperature: -30°C to 70°C
PoE Input: 12V-30V Passive PoE
PoE Output: None
Power Input: 24V 1.2A Power Supply (Included) or Automotive Connector
Serial Interface: None
SIM Slots: 3 Mini SIM Slots
Supported Voltage Range: 12V-30V
USB Ports: 1x USB 2.0 (can only be used if miniPCIe slot #1 is not used)
Dimensions: 170 x 162 x 40mm

MikroTik's RB-LTAP is a small weatherproof wireless access point with integrated LTE antennas and a mini-PCI-e slot.

The LTAP mini has one 10/100 Ethernet LAN port for your wired devices, and an RS232 serial port gives you console access for debugging. The unit has several powering options: 8-30V via the DC Jack, Passive and 803.3af PoE via the Ethernet port or power it up using the 5V micro-USB.

LTAP mini has a special enclosure with a wall mounting kit, two SIM slots to alternate between cellular providers, and integrated GPS support, making this a perfect device for use in moving vehicles like cars, buses or trains. Use the built-in GPS module to track the location of your vehicle in real time.

Combine this with an ANT-MLTE to improve signal and performance or RB-GPS for use as a tracking solution.

*Note: The second SIM slot is for scripted failover configurations only. It does not automatically failover or do load balancing.

SKU RB-LTAP
Manufacturer MikroTik
Manufacturer Product Code RB912R-2nD-LTm&EC200A

Specifications

Antenna Gain: LTE: 3.5dBi (with UFL connector); Wireless: 1.5dBi
Beam-width: 360°
Data Rate: LTE: 150Mbps Downlink; 50Mbps Uplink ; Wireless: 2.4GHz 300Mbps
Ethernet Ports: 1x 10/100
Hardware Button: Reset; Mode
Max. Power Consumption: 9W
Mounting: Wall-Mount
Operating System: RouterOS (Level 4 Licence)
Operating Temperature: -40°C to 70°C
PoE Input: 10V-57V (Passive PoE and 802.3af/at)
PoE Output: None
Power Input: 24V 1.2A Power Supply (Included)
Serial Interface: 1x RS232
SIM Slots: 2 Mini SIM slots
Supported Voltage Range: PoE in: 10V-57V (Passive PoE and 802.3af/at with unshielded cable) DC jack: 8V-30V or Micro USB: 5V
USB Ports: None
Dimensions: 139 x 77 x 28.5mm

MikroTik's RB-NETBOX5AX is a WiFi 6 outdoor router with a data rate of up to 2400Mbps. The unit features a Gigabit Ethernet Port with Passive PoE input as well as a USB port for additional storage and 2x SMA connectors for external antennas.

*Note: Maximum distance must be configured for client connections over 2km.

SKU RB-NETBOX5AX
Manufacturer MikroTik
Manufacturer Product Code L11UG-5HaxD-NB

Specifications

Antenna Gain: Antenna Dependent (2x SMA RP Female)
Beam-width: Antenna Dependent
Data Rate: 5.8GHz 2400Mbps
Ethernet Ports: 1x 10/100/1000
Hardware Button: Reset
Max. Power Consumption: 6W
Mounting: Pole Mount
Operating System: RouterOS (Level 4 Licence)
Operating Temperature: -40°C to 70°C
PoE Input: 18-28V (Passive PoE)
PoE Output: None
Power Input: 24V 1.2A Power Supply (Included)
Serial Interface: None
SIM Slots: None
Supported Voltage Range: 18V-28V
USB Ports: 1x USB 2.0
Dimensions: 245 x 121 x 50 mm

MikroTik's RB-NETMETAL is equipped with a high power 2x2 dual chain 802.11ac wireless and two RP-SMA connectors for external antennas.

The NetMetal is in a waterproof metal enclosure and it's rugged design is made to withstand the toughest conditions. It is easy to use and can be opened and closed with one hand. The solid aluminium enclosure also works as a reliable heat-sink for it’s high output power radio.

The Netmetal is equipped with powerful 720Mhz CPU, 128MB RAM, one Gigabit Ethernet port, 802.11ac wireless, one SFP cage, USB, RP-SMA connectors for external antennas and RouterOS L4 license.

Compatible with ANT-D530PA, a 5GHz, 30dBi dish antenna, also by MikroTik.

SKU RB-NETMETAL
Manufacturer MikroTik
Manufacturer Product Code RB922UAGS-5HPacD-NM

Specifications

Antenna Gain: Antenna Dependent (2x SMA RP Female)
Beam-width: Antenna Dependent
Data Rate: 5.8GHz 867Mbps
Ethernet Ports: 1x 10/100/1000
Hardware Button: Reset
Max. Power Consumption: 19W
Mounting: Pole Mount
Operating System: RouterOS (Level 4 Licence)
Operating Temperature: -40°C to 70°C
PoE Input: 8V-30V (Passive PoE)
PoE Output: None
Power Input: 24V 1.2A Power Supply (Included)
Serial Interface: None
SIM Slots: None
Supported Voltage Range: 8V-30V
USB Ports: 1x USB 2.0
Other: 1x 1.25Gbps SFP Port
Dimensions: 143 x 247 x 48mm

MikroTik's RB-NETMETALAX is a dual band Wi-Fi 6, IP66 outdoor access point featuring 1x Gigabit Ethernet Port, 1x 2.5Gbps SFP Port, a USB port, and mini PCIe slot for expansion. The unit is equipped with 2x RP-SMA connectors which make provision for an antenna of your choice. You can adapt the Net Metal ax for low range deployments with the ANT-O25 screw on antenna.

SKU RB-NETMETALAX
Manufacturer MikroTik
Manufacturer Product Code L23UGSR-5HaxD2HaxD-NM

Specifications

Antenna Gain: Antenna Dependent (2x SMA RP Female)
Beam-width: Antenna Dependent
Data Rate: 2.4GHz: 574Mbps: 5.8GHz: 2400Mbps
Ethernet Ports: 1x 10/100/1000
Hardware Button: Reset
Max. Power Consumption: 12W
Mounting: Pole Mount
Operating System: Router OS (Level 4 License)
Operating Temperature: -40°C to 70°C
PoE Input: 18V-28V (Passive PoE)
PoE Output: None
Power Input: 24V 1.2A Power Supply (Included)
Serial Interface: Non
SIM Slots: None
Supported Voltage Range: 18V-28V (PoE) 12V-28V (DC)
USB Ports: 1x USB 2.0
Other: 1x 2.5Gbps SFP Port
Dimensions: 143 x 247 x 48mm

MikroTik's OmniTik 5 PoE ac features five Gigabit Ethernet ports and support for 802.11ac. It’s equipped with a powerful 720MHz CPU, 128MB RAM, high power 1,300mW 802.11a/n/ac Dual Chain wireless (support for AC, as well as backwards compatibility with regular 802.11a/n CPE) and features a weatherproof outdoor enclosure, two integrated 7.5dBi 5GHz Omni antennas, a power supply, a PoE injector and a mounting kit.

The RB-OMNITIK5AC also supports passive or standard 802.3at/af PoE input/output (12v-57v). Ethernet ports 2-5 can power other PoE capable devices with the same voltage as applied to the unit which means that the user has less power adapters and cables to worry about. It can power 48V devices (like IP camera) if 48V input is used.

Specifications

Antenna Gain: 2x 7.5dBi
Beam-width: 360°
Data Rate: 5GHz 867Mbps
Ethernet Ports: 5x 10/100/1000
Hardware Button: Reset
Max. Power Consumption: 18W
Mounting: Pole Mount
Operating System: RouterOS (Level 4 Licence)
Operating Temperature: -40°C to 70°C
PoE Input: 12V-57V (Passive PoE, 802.3af/at)
PoE Output: 12V-57V Passive PoE on Ports 2 to 5
Power Input: 28V 2.57A Power Supply (Included)
Serial Interface: None
SIM Slots: None
Supported Voltage Range: 11V-30V
USB Ports: 1x USB 2.0
Other: None
Dimensions: 416 x 129 x 58mm

MikroTik's RB-GESP is an outdoor Gigabit Ethernet Surge Protector with a ground wire that supports Passive PoE and can be used to protect networks from lighting or surge damages. The unit comes with an IP67 outdoor enclosure and grounding cable. The maximum suggested cable length is 40 meters. For maximum protection, it is recommended to use an RB-GESP for outdoor connections and the RB-GESPIN at the other end for indoor connection.
SKU RB-GESP
Manufacturer MikroTik
Manufacturer Product Code RBGESP

Specifications

Data Line Protection: RJ45 10/100/1000 Ethernet
DC Spark-Over Voltage: 90V @ 100V/s
Discharge Current: 5kA (8/20μs)
Ethernet Ports:1x 10/100/1000
Maximum Impulse Spark-Over Voltage: 700V @ 1kV/µs
Operating Temperature: -40 to 70°C
PoE Support: Passive
Dimensions: 200 x 130 x 40mm