MikroTik LHG Mount (Metal Bracket)

The LHG mount is a basic pole mount adapter made from metal for LHG series products.

• Simple and low cost.

• Supports all LHG series, products, including LHG XL.

• Made from metal.

• Package also includes a U-bolt and a K-58 mounting kit.

MikroTik's RB-LHG5ACXL4 is a 4-pack option featuring a long-range 5GHz 802.11ac (WiFi 5) wireless radio with an integrated 27dBi grid antenna. The RB-LHG5ACXL4 is ideal for point-to-point links or for use as a CPE at longer distances.
Antenna Gain: 27dBi
Beam-width: 7°
Data Rate: 5.8GHz: 867Mbps
Ethernet Ports: 1x 10/100/1000
Hardware Button: Reset
Max. Power Consumption: 7W
Mounting: Pole Mount
Operating System: RouterOS (Level 3 Licence)
Operating Temperature: -40°C to 70°C
PoE Input: 10-30V (Passive PoE)
PoE Output: None
Power Input: 24V 0.38A Power Supply (Included)
Serial Interface: None
SIM Slots: None
Supported Voltage Range: 10-30V
USB Ports: None

Dimensions: Ø 550 x 245 mm

MikroTik's ANT-LORA is a 6.5 dBi Omni Antenna for the 824-928MHz frequency range. This device includes a 1m SMA cable and a mechanical holder for quick and easy mounting on masts 25-50mm.
Antenna Gain: 6.5dBi (868 MHz) / 4.5dBi (915 MHz)
Beam-width: Horizontal: 360° Vertical: 30°
Connector: Antenna: 1x SMA Female
Frequency Range: 824 - 928 MHz
Polarization: Vertical & Horizontal

Dimensions: 42 x 68 x 495 mm
Weight: 600g

MikroTik's RB-LTAPHDLTE6 is a compact, 4G capable, weatherproof, wireless access point – ideal for a busy, urban environment or off-the-grid outdoor networking. It has a built-in Cat6 cellular modem that supports 4G connectivity out of the box with up to 300 Mbps download speed. LTE6 also enables carrier aggregation and allows the device to use multiple bands simultaneously, which is a great advantage when there are many LTE users in the area.

*Note: To make use of more than 1 SIM at a time, a second PCI LTE module is required.
Antenna Gain: LTE: 4dBi (with UFL connector); Wireless: 2.5dBi
Beam-width: 360°
Data Rate: LTE: 300Mbps Downlink; 50Mbps Uplink ; Wireless: 2.4GHz 300Mbps
Ethernet Ports: 1x 10/100/1000
Hardware Button: Reset
Max. Power Consumption: 24W
Mounting: Wall-Mount
Operating System: RouterOS (Level 4 License)
Operating Temperature: -30°C to 70°C
PoE Input: 12V-30V Passive PoE
PoE Output: None
Power Input: 24V 1.2A Power Supply (Included) or Automotive Connector
Serial Interface: None
SIM Slots: 3 Mini SIM Slots
Supported Voltage Range: 12V-30V
USB Ports: 1x USB 2.0 (can only be used if miniPCIe slot #1 is not used)

Dimensions: 170 x 162 x 40mm

MikroTik's RB-LTAP is a small weatherproof wireless access point with integrated LTE antennas and a miniPCI-e slot.

The LTAP mini has one 10/100 Ethernet LAN port for your wired devices and an RS232 serial port gives you console access for debugging. The unit has several powering options: 8-30V via the DC Jack, Passive and 803.3af PoE via the Ethernet port or power it up using the 5V microUSB.

LTAP mini has a special enclosure with a wall mounting kit, two SIM slots to alternate between cellular providers, and integrated GPS support, making this a perfect device for use in moving vehicles like cars, buses or trains. Use the built-in GPS module to track the location of your vehicle in real time.

Combine this with a ANT-MLTE to improve signal and performance or RB-GPS for use as a tracking solution.

*Note: The second SIM slot is for scripted failover configurations only. It does not automatically failover or do load balancing.
Antenna Gain: LTE: 3.5dBi (with UFL connector); Wireless: 1.5dBi
Beam-width: 360°
Data Rate: LTE: 150Mbps Downlink; 50Mbps Uplink ; Wireless: 2.4GHz 300Mbps
Ethernet Ports: 1x 10/100
Hardware Button: Reset; Mode
Max. Power Consumption: 9W
Mounting: Wall-Mount
Operating System: RouterOS (Level 4 Licence)
Operating Temperature: -40°C to 70°C
PoE Input: 10V-57V (Passive PoE and 802.3af/at)
PoE Output: None
Power Input: 24V 1.2A Power Supply (Included)
Serial Interface: 1x RS232
SIM Slots: 2 Mini SIM slots
Supported Voltage Range: PoE in: 10V-57V (Passive PoE and 802.3af/at with unshielded cable) DC jack: 8V-30V or Micro USB: 5V
USB Ports: None

Dimensions: 139 x 77 x 28.5mm

MikroTik's RB-LTAP is a small weatherproof wireless access point with integrated LTE antennas and a miniPCI-e slot.

The LTAP mini has one 10/100 Ethernet LAN port for your wired devices and an RS232 serial port gives you console access for debugging. The unit has several powering options: 8-30V via the DC Jack, Passive and 803.3af PoE via the Ethernet port or power it up using the 5V microUSB.

LTAP mini has a special enclosure with a wall mounting kit, two SIM slots to alternate between cellular providers, and integrated GPS support, making this a perfect device for use in moving vehicles like cars, buses or trains. Use the built-in GPS module to track the location of your vehicle in real time.

Combine this with a ANT-MLTE to improve signal and performance or RB-GPS for use as a tracking solution.

*Note: The second SIM slot is for scripted failover configurations only. It does not automatically failover or do load balancing.
Antenna Gain: LTE: 3.5dBi (with UFL connector); Wireless: 1.5dBi
Beam-width: 360°
Data Rate: LTE: 150Mbps Downlink; 50Mbps Uplink ; Wireless: 2.4GHz 300Mbps
Ethernet Ports: 1x 10/100
Hardware Button: Reset; Mode
Max. Power Consumption: 9W
Mounting: Wall-Mount
Operating System: RouterOS (Level 4 Licence)
Operating Temperature: -40°C to 70°C
PoE Input: 10V-57V (Passive PoE and 802.3af/at)
PoE Output: None
Power Input: 24V 1.2A Power Supply (Included)
Serial Interface: 1x RS232
SIM Slots: 2 Mini SIM slots
Supported Voltage Range: PoE in: 10V-57V (Passive PoE and 802.3af/at with unshielded cable) DC jack: 8V-30V or Micro USB: 5V
USB Ports: None

Dimensions: 139 x 77 x 28.5mm

MikroTik mANTBox ax 15s - 120degree 15dBi WiFi6 Sector AP


A drop-in Wi-Fi 6 upgrade for the popular mANTBox dual-band sector antenna base stations. One powerful package for all your outdoor network needs, perfect for camps, stadiums and parks!


Managing outdoor wireless network has never been easier: mANTBox ax 15s can provide unparalleled wireless point-to-multipoint connectivity for a vast variety of devices over a distance of 20 kilometers!


A potent combination of modern dual-core ARM CPUs, our latest 802.11ax Wi-Fi 6 dual-band radios and powerful built-in sector antennas will take your signal stability, speed, and responsiveness to the next level! There’s a Gigabit Ethernet port with PoE-in and an SFP port with 2.5 Gigabit support for extra fast fiber uplinks.


Upgrading your setup to Wi-Fi 6 offers multiple benefits:

Speed: we’ve seen up to 40% higher speed in the 5 GHz spectrum and up to 90% higher speed in the 2.4 GHz spectrum.
Security: WPA3 encryption and management frame protection prevent all sorts of attacks, like bruteforcing and WPA2 handshakecapture deauthentication attacks.
Reliability: seamless fast transition (roaming) enables smooth, non-stop signal when you have to switch between access points. Also, Wi-Fi 6 ensures a fair traffic distribution if the connection is shared by a large number of users.
Energy efficiency: features like Target Wake Time reduce power consumption in the long run. Better for your wallet and the planet!


mANTBox package includes everything you need: a Gigabit PoE injector, a power supply, a hose clamp and a fastening set, and the MikroTik quickMOUNT pro. This advanced wall mount adapter allows turning antenna within 140° both horizontally and vertically. With the quickMOUNT pro it is possible to perfectly set antenna alignment using an integrated graduated scale.

MikroTik's RB-NETBOX5AX is a WiFi 6 outdoor router with a data rate of up to 2400Mbps. The unit features a Gigabit Ethernet Port with Passive PoE input as well as a USB port for additional storage and 2x SMA connectors for external antennas.

*Note: Maximum distance must be configured for client connections over 2km.
Antenna Gain: Antenna Dependent (2x SMA RP Female)
Beam-width: Antenna Dependant
Data Rate: 5.8GHz 2400Mbps
Ethernet Ports: 1x 10/100/1000
Hardware Button: Reset
Max. Power Consumption: 6W
Mounting: Pole Mount
Operating System: RouterOS (Level 4 Licence)
Operating Temperature: -40°C to 70°C
PoE Input: 18-28V (Passive PoE)
PoE Output: None
Power Input: 24V 1.2A Power Supply (Included)
Serial Interface: None
SIM Slots: None
Supported Voltage Range: 18V-28V
USB Ports: 1x USB 2.0

Dimensions: 245 x 121 x 50 mm

MikroTik's RB-NETMETAL is equipped with a high power 2x2 dual chain 802.11ac wireless and two RP-SMA connectors for external antennas.

The NetMetal is in a waterproof metal enclosure and it's rugged design is made to withstand the toughest conditions. It is easy to use and can be opened and closed with one hand. The solid aluminium enclosure also works as a reliable heat-sink for it’s high output power radio.

The Netmetal is equipped with powerful 720Mhz CPU, 128MB RAM, one Gigabit Ethernet port, 802.11ac wireless, one SFP cage, USB, RP-SMA connectors for external antennas and RouterOS L4 license.

Compatible with ANT-D530PA, a 5GHz, 30dBi dish antenna, also by MikroTik.
Antenna Gain: Antenna Dependent (2x SMA RP Female)
Beam-width: Antenna Dependant
Data Rate: 5.8GHz 867Mbps
Ethernet Ports: 1x 10/100/1000
Hardware Button: Reset
Max. Power Consumption: 19W
Mounting: Pole Mount
Operating System: RouterOS (Level 4 Licence)
Operating Temperature: -40°C to 70°C
PoE Input: 8V-30V (Passive PoE)
PoE Output: None
Power Input: 24V 1.2A Power Supply (Included)
Serial Interface: None
SIM Slots: None
Supported Voltage Range: 8V-30V
USB Ports: 1x USB 2.0
Other: 1x 1.25Gbps SFP Port

Dimensions: 143 x 247 x 48mm

MikroTik's RB-NETMETALAX is a dual band WiFi 6, IP66 outdoor access point featuring 1x Gigabit Ethernet Port, 1x 2.5Gbps SFP Port, a USB port, and miniPCIe slot for expansion. The unit is equipped with 2x RP-SMA connectors which make provision for an antenna of your choice. You can adapt the NetMetal ax for low range deployments with the ANT-O25 screw on antenna.
Antenna Gain: Antenna Dependent (2x SMA RP Female)
Beam-width: Antenna Dependant
Data Rate: 2.4GHz: 574Mbps : 5.8GHz: 2400Mbps
Ethernet Ports: 1x 10/100/1000
Hardware Button: Reset
Max. Power Consumption: 12W
Mounting: Pole Mount
Operating System: RouterOS (Level 4 Licence)
Operating Temperature: -40°C to 70°C
PoE Input: 18V-28V (Passive PoE)
PoE Output: None
Power Input: 24V 1.2A Power Supply (Included)
Serial Interface: Non
SIM Slots: None
Supported Voltage Range: 18V-28V (PoE) 12V-28V (DC)
USB Ports: 1x USB 2.0
Other: 1x 2.5Gbps SFP Port

Dimensions: 143 x 247 x 48mm

The OmniTik 5 PoE ac features five Gigabit Ethernet ports and support for 802.11ac. It’s equipped with a powerful 720MHz CPU, 128MB RAM, high power 1,300mW 802.11a/n/ac Dual Chain wireless (support for AC as well as backwards compatible with regular 802.11a/n CPE) and comes with a new design weatherproof outdoor enclosure, two integrated 7.5dBi 5GHz omni antennas, a power supply, a PoE injector and a mounting kit.

It also supports passive or standard 802.3at/af PoE input/output (12v-57v). Ethernet ports 2-5 can power other PoE capable devices with the same voltage as applied to the unit. Less power adapters and cables to worry about! It can power 48V devices (like IP camera), if 48V input is used.


This is the international version OmniTIK 5 ac which supports the 5150MHz-5875MHz range.

RouterBoard Specs
RouterBoard CPU 720MHz QCA9557
Memory 128 MB
Wired Interfaces 5x Gigabit Ethernet Ports, 1x USB Type-A Port
Wireless Interface 5GHz 802.11a/n/ac (QCA9892 Wireless Chipset)
Transmitted Wireless Power Up to 31dBm
Antenna Gain 7.5dBi Integrated 5GHz Antennas
DC Power No DC Jack, PoE Input Only
PoE Yes, PoE input on Eth1 (passive 12-57V), PoE output on Eth2-5 (same as input current)
RouterBoard License Level 4
Operating System RouterOS

MikroTik's OmniTik 5 PoE ac features five Gigabit Ethernet ports and support for 802.11ac. It’s equipped with a powerful 720MHz CPU, 128MB RAM, high power 1,300mW 802.11a/n/ac Dual Chain wireless (support for AC, as well as backwards compatibility with regular 802.11a/n CPE) and features a weatherproof outdoor enclosure, two integrated 7.5dBi 5GHz Omni antennas, a power supply, a PoE injector and a mounting kit.

The RB-OMNITIK5AC also supports passive or standard 802.3at/af PoE input/output (12v-57v). Ethernet ports 2-5 can power other PoE capable devices with the same voltage as applied to the unit which means that the user has less power adapters and cables to worry about. It can power 48V devices (like IP camera) if 48V input is used.
Antenna Gain: 2x 7.5dBi
Beam-width: 360°
Data Rate: 5GHz 867Mbps
Ethernet Ports: 5x 10/100/1000
Hardware Button: Reset
Max. Power Consumption: 18W
Mounting: Pole Mount
Operating System: RouterOS (Level 4 Licence)
Operating Temperature: -40°C to 70°C
PoE Input: 12V-57V (Passive PoE, 802.3af/at)
PoE Output: 12V-57V Passive PoE on Ports 2 to 5
Power Input: 28V 2.57A Power Supply (Included)
Serial Interface: None
SIM Slots: None
Supported Voltage Range: 11V-30V
USB Ports: 1x USB 2.0
Other: None

Dimensions: 416 x 129 x 58mm

MikroTik's RB-GPERX4 is a compact, outdoor-ready IP68, Gigabit device designed to split a single 90W PoE-out port into 3x 30W PoE-out ports, providing cost-effective flexibility for powering cameras, access points, and other devices. The RB-GPERX4 supports PoE-in as well as 2-pin terminal and is equipped with SwOS Lite for advanced management.

*Note: Ports are isolated and only communicate with the first port. This device functions as an extender, not a traditional switch.
Specifications Ethernet Ports: 4x 10/100/1000
Max Power Consumption: 4W
Hardware Button: None
Mounting: Pole Mount
Operating System: SwOS Lite
Operating Temperature: -40°C to 70°C
PoE Input: 802.3af/bt
PoE Output: 802.3af/at Ports 2-4
Power Input: 24V-57V (2-Pin Terminal) ; 802.3bt PoE
SFP Ports: None
Supported Voltage Range: 24V-57V (2-Pin Terminal) ; 48-57V (PoE)

Dimensions: 281 x 76 x 70 mm

MikroTik's PowerBox Pro is an outdoor five Gigabit Ethernet port router with PoE output on four ports. Since the device has a waterproof outdoor case, you can mount it on a tower, or in other outdoor locations. It also supports passive or standard 802.3at/af PoE input/output. Ethernet ports 2-5 can power other PoE capable devices with the same voltage as applied to the unit. The PowerBox Pro can power 802.3at and af mode B compatible devices, if 48-57 input voltage is used.

The device has a SFP port for adding optical fiber connectivity. It is affordable, small, easy to use, with a very powerful 800MHz CPU, capable of all the advanced configurations that RouterOS supports.
Ethernet Ports: 5x 10/100/1000
Hardware Button: Reset
Max. Power Consumption: 6W
Mounting: Pole-Mount & DIN Mount
Operating System: RouterOS (Level 4 Licence)
Operating Temperature: -40°C to 70°C
PoE Input: 12V-57V (Passive PoE; 802.3af/at)
PoE Output: 12V-57V Passive PoE; 802.3af/at on Ports 2~5
Power Input: 24V 2.5A Power Supply (Included)
Processor: 1 Core 800MHz; QCA9557
Serial Interface: None
SFP Ports: 1x 1.25Gbps
Supported Voltage Range: 12V-57V
System Memory: 128MB
USB Ports: None
Other: None

Dimensions: 125 x 52 x 225mm

MikroTik's PowerBox Pro is an outdoor five Gigabit Ethernet port router with PoE output on four ports. Since the device has a waterproof outdoor case, you can mount it on a tower, or in other outdoor locations. It also supports passive or standard 802.3at/af PoE input/output. Ethernet ports 2-5 can power other PoE capable devices with the same voltage as applied to the unit. The PowerBox Pro can power 802.3at and af mode B compatible devices, if 48-57 input voltage is used.

The device has a SFP port for adding optical fiber connectivity. It is affordable, small, easy to use, with a very powerful 800MHz CPU, capable of all the advanced configurations that RouterOS supports.
thernet Ports: 5x 10/100/1000
Hardware Button: Reset
Max. Power Consumption: 6W
Mounting: Pole-Mount & DIN Mount
Operating System: RouterOS (Level 4 Licence)
Operating Temperature: -40°C to 70°C
PoE Input: 12V-57V (Passive PoE; 802.3af/at)
PoE Output: 12V-57V Passive PoE; 802.3af/at on Ports 2~5
Power Input: 24V 2.5A Power Supply (Included)
Processor: 1 Core 800MHz; QCA9557
Serial Interface: None
SFP Ports: 1x 1.25Gbps
Supported Voltage Range: 12V-57V
System Memory: 128MB
USB Ports: None
Other: None

MikroTik quickMOUNT extra

The quickMOUNT extra is a advanced wall mount adapter for large point to point and sector antennas.

You can mount it on the wall or use it as an adapter from large diameter pole to small size antenna mounting clip ensuring reliable fitment. The quickMOUNT extra gives possibility to turn antenna within 190°.

The quickMOUNT extra is compatible with MikroTik's long range heavy antennas such as the 30dBi parabolic dish (mANT 30) or their 19dBi sector antenna (mANT 19s).

MikroTik QuickMount Bracket

The quickMOUNT is a basic wall mount adapter for small point to point and sector antennas. You can mount it on the wall or use it as an adapter from large diameter pole to small size antenna mounting clip ensuring reliable fitment. The quickMOUNT allows you to rotate your antenna through 190°.

With the quickMOUNT it is possible to simultaneously mount two SXTs, thus creating a repeater access point or creating large sector coverage.

You can use the quickMOUNT with any pole mountable device weighing less than 1.5 kg, such as SXT’s, Omnitik, BaseBox or any other pole mountable device.

MikroTik QuickMount Pro Bracket

The quickMOUNT pro is an advanced wall mount adapter for small point to point and sector antennas. You can mount it on the wall or use it as an adapter from large diameter pole to small size antenna mounting clip ensuring reliable fitment.

The quickMOUNT pro gives possibility to turn antenna within 140° both in horizontal and vertical plane, and it can be used with any pole mountable device or MikroTik’s small mounting clip with weight less than 1.5 kg.

The quickMOUNT has high durability due to it’s special plastic composite material - anvilNITE (TM).

MikroTik QuickMount Pro LHG Bracket

The quickMOUNT pro LHG is a advanced wall or pole mount adapter for our new LHG antennas.

The quickMOUNT pro gives possibility to turn antenna within 140° both in horizontal and vertical plane. With the quickMOUNT pro

it is possible to perfectly set antenna alignment using integrated graduated scale.

With this kit you can mount up to four RB5009UG+S+IN routers in a single 1U rackmount space! No more server-room-Tetris, just pure productivity.