Smart Tech, Home & Business Solutions – Quickstore South Africa

Linkbasic’s SFP-DC1 is a 1 metre high-performance SFP+ DAC designed for 10G Ethernet and 10G fibre applications. SFP+ copper assemblies provide a cost-effective uplink solution and simplify your deployment.

*Note: Compatible with MikroTik, Ubiquiti
SKU SFP-DC1
Manufacturer Linkbasic
Manufacturer Product Code A-30-D-1

Specifications

Cable Length: 1M
Connectors: 2x SFP+ Modules
Data Rate: 10Gbps
Form Factor: Direct Attached
Mode: Copper
Wavelength: None

Linkbasic’s SFP-DC3 is a 3 metre high-performance SFP+ DAC designed for 10G Ethernet and fibre applications. SFP+ copper assemblies provide a cost-effective uplink solution and simplify your deployment.

* Note: Compatible with Mikrotik, Ubiquiti products.

SKU SFP-DC3
Manufacturer Linkbasic
Manufacturer Product Code A-30-D-3

Specifications

Cable Length: 3M
Connectors: 2x SFP+ Modules
Data Rate: 10Gbps
Form Factor: Direct Attached
Mode: Copper
Wavelength: None

Linkbasic’s SFP-DC5 is a 5-metre high-performance SFP+ DAC designed for 10G Ethernet and fibre applications. SFP+ copper assemblies provide a cost-effective uplink solution and simplify your deployment.

* Note: Compatible with Mikrotik, Ubiquiti products.
SKU SFP-DC5
Manufacturer Linkbasic
Manufacturer Product Code A-26-D-5

Specifications

Cable Length: 5M
Connectors: 2x SFP+ Modules
Data Rate: 10Gbps
Form Factor: Direct Attached
Mode: Copper
Wavelength: None

MikroTik's ANT-D530PA is a 5GHz 30dBi dish antenna and precision alignment mount built to accommodate the BaseBox series of products. It can also be used with any pole-mounted, 5GHz wireless device due to the adequate length of the included Flex Guide cable.

*Note: Radio not included

Specifications

Antenna Gain: 30dBi
Beam-width: +/-2.5 deg
Connector: 2x RP SMA Female
Frequency Range: 4.7GHz-5.875GHz
Polarization: Vertical & Horizontal
Wind Loading: 181.4kg @ 200km/hr
Dimensions: Ø 700 x 450mm
PLEASE TAKE NOTE:
This product is the MikroTik Dish ONLY. Electronic devices/CPE’s such as the MikroTik BaseBox5 or Ubiquiti RocketM5 are sold separately and not included. Pictures for the mANT30 dish are for illustration purposes only and shows the CPE mounting position for items such as the BaseBox5.

Scoop's POE-RACK is a blank rack mountable 19" panel, ideal for mounting multiple PoE injectors.

*Note: This product is compatible with the Ubiquiti PoE Injectors. PoE Injectors sold separately.
SKU POE-RACK
Manufacturer Scoop

Specifications

Material: Cold steel sheet with electrostatic power coating
Size: 19 inch rack-mountable

Ubiquiti's UACC-RJ451G enables you to convert unused SFP+ Ports to 1G Ethernet RJ45 Ports.

*Note: The UACC-RJ451G module is not compatible with MikroTik devices.

Specifications
Connector: RJ45
Data Rate: 1.25Gbps
Form Factor: SFP
Mode: Copper
Supported Distance: 100m
Wavelength: None

Ubiquiti's UCG-FIBER is a desktop 10Gbps dual WAN, UniFi cloud gateway with selectable NVR storage via SSD up to 2TB. The unit runs the complete UniFi application suite for full stack network management and features 1x 10Gbps WAN port, 4x 2.5Gbps LAN Ports, one with 802.3at (PoE+) PoE output, as well as 2 x SFP+ ports.

It can be configured and managed with the UniFi Network Application.

Note: NVMe SSD not included. Third-party SSD installation requires tray accessory.

Specifications
Ethernet Ports: 4x 10/100/1000/2500 (LAN); 1x 10/100/1000/10000 (WAN)
Hardware Button: Reset
Max. Power Consumption: 29.4W
Mounting: Desktop
Operating System: UniFi
Operating Temperature: 0°C to 40°C
PoE Input: None
PoE Output: 802.3at (PoE+) on Port 4
Power Input: 54V 1.1A Power Adapter (Included)
Processor: Quad-core ARM® Cortex®-A73 at 2.2 GHz
Serial Interface: None
SFP Ports: 2 x SFP+ (1x WAN ; 1 x LAN)
Supported Voltage Range: 50-57V
System Memory: 3GB
USB Ports: None
Dimensions: 212.8 x 127.6 x 30 mm
Weight: 675g

Ubiquiti's UXG-FIBER is a desktop 10Gbps dual WAN, independent gateway which features 1x 10Gbps SFP+ port, 4x 2.5Gbps LAN Ports, one with PoE+ (802.3at) output as well as 1x SFP+ and 1x 10Gbps Ethernet WAN ports.

It can be configured and managed with a Cloud key, Official UniFi Hosting, or UniFi Network Server.

Specifications

Ethernet Ports: 4x 10/100/1000/2500 (LAN); 1x 10/100/1000/10000 (WAN)
Hardware Button: Reset
Max. Power Consumption: 25W
Mounting: Desktop
Operating System: UniFi
Operating Temperature: 0°C to 40°C
PoE Input: None
PoE Output: 802.3at (PoE+) on Port 4
Power Input: 54V 1.1A Power Adapter (Included)
Processor: Quad-core ARM® Cortex®-A73 at 2.2 GHz
Serial Interface: None
SFP Ports: 2 x SFP+ (1x WAN ; 1 x LAN)
Supported Voltage Range: 50-57V
System Memory: 2GB
USB Ports: None
Dimensions: 212.8 x 127.6 x 30 mm
Weight: 605g

Ubiquiti's UPOE54-60W-10G is a 54V, 1.15A, 10Gbps, PoE injector. The unit is compatible with products that require 802.3bt PoE and features Electrostatic Discharge (ESD) protection, surge protection, clamping protection, peak pulse current and maximum surge discharge, all of which aid in protecting your PoE devices.

*Note: Power cable not included, we recommend POWU.

Specifications

Ethernet Ports: 2x 10/100/1000/2500/10000
PoE Output: 54V 1.15A Passive PoE
Power Input: Clover Power Cord (Not Included)
Supported Voltage Range: 100V-240V

Ubiquiti 10Gbps Multi Mode (LC) SFP+ Module Pair

The UF-MM-10G is ideal for short-distance,bi-directional, multi-mode fiber runs for distances of up to 300m at 10 Gbps.

Outdoor Fiber Installations

For short-distance runs of 300 meters, use UFiber 10G multi-mode modules for maximum reuse of existing infrastructure.
UF-MM-10G
Supported Media Multi-Mode Fiber
Connector Type (2) LC

TX Wavelength
850 nm

RX Wavelength
850 nm

Data Rate 10 Gbps SFP+
Cable Distance 300 m
Pack Options 1-Pair


Please note: This kit is only sold as a pair (one box with 2 units inside)

Ubiquiti 10Gbps RJ45 Copper SFP+ Module

Ubiquiti Networks offers a variety of U® Fiber modules to suit your fiber connectivity applications.

To connect copper Ethernet cables to SFP ports, use the UF-RJ45-10G in an SFP+ port for speeds of up to 10 Gbps and distances of up to 30 m, or use the UF-RJ45-1G in an SFP port for speeds of up to 1 Gbps and distances of up to 100 m.
Supported Media Copper
Connector Type RJ45
BiDi N/A
TX Wavelength N/A
RX Wavelength N/A
Data Rate 1/10 Gbps
Cable Distance
1 Gbps
(Cat 5e)
100 m
10 Gbps
(Cat 6A)
30 m
Pack Options 1-Pack

Ubiquiti 10Gbps Single Mode (LC) SFP+ Module Pair


The UF-SM-10G is ideal for long-distance, outdoor, bi-directional, single-mode fiber runs for distances of up to 10 km at 10 Gbps.

Outdoor Fiber Installations

For long-distance runs of up to 10KM, use UFiber 10G single-mode modules for maximum reuse of existing infrastructure and maximum speed.
UF-SM-10G
Supported Media Single-Mode Fiber
Connector Type (2) LC
BiDi No
TX Wavelength
1310nm
RX Wavelength
1310nm
Data Rate 10 Gbps SFP+
Cable Distance 10 km
Pack Options 1-Pair

Please note: This kit is only sold as a pair (one box with 2 units inside)

Ubiquiti 1Gbps RJ45 Copper SFP Module


Ubiquiti Networks offers a variety of U® Fiber modules to suit your fiber connectivity applications.


To connect copper Ethernet cables to SFP ports, use the UF-RJ45-10G in an SFP+ port for speeds of up to 10 Gbps and distances of up to 30 m, or use the UF-RJ45-1G in an SFP port for speeds of up to 1 Gbps and distances of up to 100m.
upported Media Copper
Connector Type RJ45
BiDi N/A
TX Wavelength N/A
RX Wavelength N/A
Data Rate 10/100/1000 Mbps
Cable Distance 100 m

Ubiquiti's UPOE48-30W-2G is a 48V, 0.65A, 2.5Gbps, PoE injector. The unit is compatible with products that require 802.3at PoE and features Electrostatic Discharge (ESD) protection, surge protection, clamping protection, peak pulse current and maximum surge discharge, all of which aid in protecting your PoE devices.

*Note: Power cable not included, we recommend POWU.

Specifications

Ethernet Ports: 2x 10/100/1000/2500
PoE Output: 48V 0.65A Passive PoE
Power Input: Clover Power Cord (Not Included)
Supported Voltage Range: 100V-240V

Ubiquiti's UCG-MAX is a powerful and compact 2.5Gbps multi-WAN UniFi Cloud Gateway with a full suite of advanced routing and security features with 1.5Gbps IPS routing and a 512GB SSD for NVR storage. The unit can run all UniFi applications for full-stack network management and features 4x 2.5Gbps Ethernet ports, 1x 2.5Gbps WAN Port, a quad-core 1.5GHz CPU, 0.96" LCM status display, and Multi-WAN load balancing.

It can be configured and managed with the UniFi Network Application.

Specifications

Ethernet Ports: 4x 10/100/1000/2500 (LAN); 1x 10/100/1000/2500 (WAN)
Hardware Button: Reset
Max. Power Consumption: 16.1W
Mounting: Desktop
Operating System: UniFi
Operating Temperature: -10°C to 40°C
PoE Input: None
PoE Output: None
Power Input: 1x 5V 5A USB Power Adapter (Included)
Processor: Quad-core ARM® Cortex®-A53 at 1.5GHz
Serial Interface: None
SFP Ports: None
Supported Voltage Range: 5V 3A via USB
System Memory: 3GB DDR4
USB Ports: None
Dimensions: 141.8 x 127.6 x 30 mm
Weight: 0.52kg

Ubiquiti's UACC-PSU-210W is a wall mountable AC power adapter which delivers 210W at 54V DC, ideal for powering PoE Switches.

Specifications
Compatibility: USW-ULTRA, USW-U60, USW-PRO-MAX16P, USW-U210
Connector: IEC
DC plug: 5.5 x 2.1 x 11.5 mm
DC cable: UL11353 16AWG 1.5 m
Voltage: 54V
Wattage: 210W
Dimensions: 190 x 86 x 26 mm
Weight: 2kg

The POE-802O adapter transforms almost any Ubiquiti PoE device into a fully compliant 48V, PoE-compatible product.

The Instant PoE Adapter works seamlessly with a variety of PoE switches for remote power control applications. You can conveniently power or power cycle your remote devices using your PoE switch.
Specifications
Interface In: (1) Gigabit RJ45 Port
Interface Out: (1) Gigabit Ethernet Cable
Power Input : 48V; 802.3af
Max Power Output: 24V; 0.5A
Ethernet ESD/Surge Protection: ±15kV
Dimensions: Ø 30.2 x 166 mm
Dimensions with RJ45 Cable: Ø 30.2 x 366.6 mm
Weight: 90g
Operating Temperature: -30 to 70° C

Ubiquiti's UACC-AIPORT-RM is a 1U rack-mount accessory that supports up to 6x AI Ports.

Specifications
Enclosure Material: SGCC steel, polycarbonate
Mounting: Mini rack/rack
Ambient Operating Temperature: -20° to 40° C (-4° to 104° F)
Dimensions: 442.4 x 158.5 x 42.8 mm
Weight: 650g

Ubiquiti's UACC-PM is an easy-to-install wall mount bracket for the U7-PRO or U6-PRO.
Specifications
Dimensions: 174 x 189 x 30 mm
Weight: 136g

All-in-one router and security gateway with an integrated PoE switch and network video recorder.

The Dream Machine Special Edition (UDM SE) is an enterprise-grade UniFi OS Console capable of helping home and business owners alike seamlessly scale and manage their networks with high-speed, dual-WAN connectivity (10G SFP+ and 2.5GbE RJ45 ports), a Gigabit, PoE switch, and a network video recorder (NVR) with 128 GB of internal storage. Powered by UniFi OS, the UDM SE gives you full control of all your UniFi devices, including access points, Protect cameras, Talk phones, and Access readers. It's also a future-proof console since it will be able to run all upcoming UniFi OS applications. Engineered for end-to-end simplicity, the UDM SE features an integrated Bluetooth radio that streamlines the initial setup and configuration process, which can be completed in minutes with the UniFI Network application (web or mobile).


Features:
1.7 GHz quad-core processor
Dual WAN ports (10G SFP+ and 2.5GbE RJ45)
(8) GbE RJ45 ports, including (6) PoE and (2) PoE+ LAN ports
(1) 10G SFP+ LAN port
(1) 1.3" LCM color touchscreen for at-a-glance network monitoring
Customizable internet threat filtration and traffic identification for enhanced network security
Quick, Bluetooth-powered setup via the UniFi Network web application or mobile app
1U-sized, rack-mountable device
Connect a SmartPower Redundant Power System to create an uninterruptible network
Integrated security gateway and UniFi Protect-ready NVR that supports compatible 3.5" HDDs
128 GB integrated storage for full UniFi OS Application experience
Dimensions
442.4 x 43.7 x 285.6 mm
(17.4 x 1.7 x 11.2")
Weight 5 kg (10.9 lb)