Ubiquiti's AF-11DUPL is a duplexer used to enable the use of low band frequencies on the AF-11. A single duplexer is required for a SISO configuration, whereas two units are required for MIMO.

*Note: AF-11 and dish not Included. For more information regarding an 11GHz spectrum license, please email hello@quickstore.co.za.

Low Channel: 10.700GHz - 10.955GHz
High Channel: 11.200GHz - 11.445GHz

Ubiquiti's AF-11DUPH is a duplexer used to enable the use of high band frequencies on the AF-11. A single duplexer is required for a SISO configuration, whereas two units are required for MIMO.

*Note: AF-11 and dish not Included. For more information regarding an 11GHz spectrum license, please email hello@quickstore.co.za
Low Channel: 10.940GHz – 11.200GHz
High Channel: 11.440GHz – 11.700GHz

Product Overview

The Ubiquiti UISP airCube ISP (ACB-ISP) is a compact and efficient 2.4 GHz WiFi 4 Router and Access Point designed for Internet Service Providers and network deployments. It seamlessly integrates with the UISP network management platform for easy control and monitoring. The device features 24V Passive PoE pass-through, making it ideal for powering airMAX® CPEs without additional wiring complexity.
Key Features

Dual Functionality: Acts as both a WiFi router and access point on the 2.4 GHz band.

WiFi 4 Standard: Delivers reliable 300 Mbps data rates, perfect for ISP customer premises.

24V Passive PoE Pass-Through: Powers compatible airMAX® devices directly for simplified deployments.

Four Ethernet Ports: Four 10/100 Mbps LAN ports for wired connections.

Compact & Lightweight: Desktop mountable with a small footprint (87.8 x 89.5 x 89.25 mm; 215g).

360° Antenna Coverage: Built-in 4 dBi omnidirectional antenna with wide beam-width.

Robust Operating Conditions: Works reliably from -10°C to 50°C.

Easy Reset: Dedicated hardware reset button for quick troubleshooting.

Power Options: Supports 24V Passive PoE input or 5V Micro USB power (power supply and injector not included).

Managed by UISP Platform: Seamless integration for centralized network management and monitoring.

Technical Specifications
Specification Details
Frequency 2.4 GHz (WiFi 4)
Data Rate Up to 300 Mbps
Antenna Gain 4 dBi Omnidirectional
Beam-width 360°
Ethernet Ports 4 × 10/100 Mbps
Power Consumption Max 5 Watts
PoE Input 24V Passive PoE
PoE Pass-Through Output 24V Passive PoE
Power Input Options 24V Passive PoE or Micro USB (2A)
Operating Temp. Range -10°C to 50°C
Dimensions (mm) 87.80 x 89.50 x 89.25
Weight 215g
Package Contents

1 × Ubiquiti UISP airCube ISP WiFi Access Point (ACB-ISP)

1 × Quick Start Guide

Note: PoE injector and power supply are not included. Recommended PoE injector: POE-24G-24W.
Why Buy from QuickStore.co.za?

✔ Genuine Ubiquiti products with official warranty
✔ Fast nationwide delivery
✔ Expert technical support available

Ubiquiti's ACB-AC is a dual band, WiFi 5 Router/Access Point. It features 24V PoE pass-through to easily integrate with airMAX® CPEs. It is designed to work with the UISP network management platform.
Antenna Gain: 2.4GHz 4dBi ; 5.8GHz 5dBi
Beam-width: 360°
Data Rate: 2.4GHz 300 Mbps ; 5.8GHz 866.7Mbps
Ethernet Ports: 4x 10/100/1000
Hardware Button: Reset
Max. Power Consumption: 8.5W
Mounting: Desktop
Operating System: airOS
Operating Temperature: -10°C to 50°C
PoE Input: 24V Passive PoE on Port 1
PoE Output: 24V Passive PoE Pass-Through on Port 4
Power Input: 24V; 0.83A Power Supply (Included)
Serial Interface: None
SFP Ports: None
Supported Voltage Range: 22-26V
USB Ports: None

Ubiquiti's LTU-XR is a 5GHz, 29dBi, integrated radio featuring proprietary LTU technology. This technology is not impeded by the limitations of standard 802.11 WiFi technology, supporting 1024QAM and offering Channel Width Flexibility (10/20/30/40/50/60/80/100 MHz). Its custom LTU silicon and radio architecture provide up to 900+ Mbps of real TCP/IP throughput. It can be managed via the UISP network management platform.

*Note: PtP mode requires firmware versions 1.5.1 or later. For maximum throughput firmware version 2.3.0 or later is required.

Specifications

Antenna Gain: 29dBi
Beam-width: 3 dB: 5.5°, 6 dB: 7.5° (Horizontal & Vertical)
Data Rate: Up to 550Mbps
Ethernet Ports: 1x 10/100/1000
Hardware Button: Reset
Max. Power Consumption: 8.5W
Mounting: Pole-Mount
Operating System: airOS
Operating Temperature: -40°C to 55°C
PoE Input: 24V Passive PoE
PoE Output: None
Power Input: 24V 0.5A Gigabit PoE Injector (Included)
Serial Interface: None
SIM Slots: None
Supported Voltage Range: 22V-26V
USB Ports: None
Dimensions: 747 x 525 x 347mm
Weight: 3.2kg

Ubiquiti's LTU-ROCKET is a connectorised radio featuring proprietary LTU technology. This technology is not impeded by the limitations of standard 802.11 WiFi technology, supporting 1024QAM. and offering Channel Width Flexibility (10/20/30/40/50/60/80/100 MHz ). Its custom LTU silicon and radio architecture provide up to 900+ Mbps of real TCP/IP throughput. It can be managed via the UISP network management platform.

Specifications

*Note: For maximum throughput firmware version 2.3.0 or later is required.
Antenna Gain: Antenna Dependent (2x RP SMA Female)
Beam-width: Antenna Dependent
Data Rate: Up to 600Mbps
Ethernet Ports: 1x 10/100/1000
Hardware Button: Reset
Max. Power Consumption: 25W
Mounting: Pole-Mount
Operating System: airOS
Operating Temperature: -40°C to 55°C
PoE Input: 24V Passive PoE
PoE Output: None
Power Input: 24V 1A Gigabit PoE Injector (Included)
Serial Interface: None
SIM Slots: None
Supported Voltage Range: 24V
USB Ports: None
Dimensions: 244 x 82 x 48mm
Weight: 468g

Ubiquiti's LTU-PRO is a 5GHz, 24dBi, integrated radio featuring proprietary LTU technology. This technology is not impeded by the limitations of standard 802.11 WiFi technology, supporting 1024QAM and offering Channel Width Flexibility (10/20/30/40/50/60/80/100 MHz). Its custom LTU silicon and radio architecture provide up to 900+ Mbps of real TCP/IP throughput. It can be managed via the UISP network management platform.

*Note: PtP mode requires firmware versions 1.5.1 or later. For maximum throughput firmware version 2.3.0 or later is required.

Specifications

Antenna Gain: 24dBi
Beam-width: 14°
Data Rate: Up to 550Mbps
Ethernet Ports: 1x 10/100/1000
Hardware Button: Reset
Max. Power Consumption: 9W
Mounting: Pole-Mount
Operating System: airOS
Operating Temperature: -40°C to 60°C
PoE Input: 24V Passive PoE
PoE Output: None
Power Input: 24V 0.5A Gigabit PoE Injector (Included)
Serial Interface: None
SIM Slots: None
Supported Voltage Range: 22V-26V
USB Ports: None
Dimensions: 316.5 x 316.5 x 174.3mm
Weight: 1.3kg

Ubiquiti's LTU-LITE is a 5GHz, 13dBi integrated radio featuring proprietary LTU technology. This technology is not impeded by the limitations of standard 802.11 WiFi technology, supporting 1024QAM and offering Channel Width Flexibility (10/20/30/40/50/60/80/100 MHz). Its custom LTU silicon and radio architecture provide up to 900+ Mbps of real TCP/IP throughput. It can be managed via the UISP network management platform.

*Note: PtP mode requires firmware versions 1.5.1 or later. For maximum throughput firmware version 2.3.0 or later is required.

Specifications

Antenna Gain: 13dBi
Beam-width: 45°
Data Rate: Up to 550Mbps
Ethernet Ports: 1x 10/100/1000
Hardware Button: Reset
Max. Power Consumption: 8.5W
Mounting: Pole-Mount & Wall-Mount
Operating System: airOS
Operating Temperature: -40°C to 55°C
PoE Input: 24V Passive PoE
PoE Output: None
Power Input: 24V 0.5A Gigabit PoE Injector (Included)
Serial Interface: None
SIM Slots: None
Supported Voltage Range: 22V-26V
USB Ports: None
Dimensions: 153 x 84 x 39.5mm
Weight: 250g

Brand: Ubiquiti
Product Code: WAVE‑PRO
Description: Ubiquiti UISP 60GHz/5GHz Wave Professional Radio

Product Overview
The Ubiquiti Wave‑Pro is a high‑capacity 60GHz radio system with a 5GHz backup radio, designed for professional long‑range wireless deployments. Featuring an integrated high‑gain antenna, 2 × 2.5Gbps Ethernet ports, 1 × 10Gbps SFP+ uplink, and integrated GPS, it delivers true duplex gigabit performance for PtP links up to 15km. In PtMP mode, it can operate as a CPE when paired with the Wave‑AP (up to 8km) or Wave‑APM (up to 6km), achieving a total throughput of up to 5.4Gbps. The unit includes a Bluetooth management radio for easy setup via the UISP platform, plus a precision alignment tool for reliable antenna positioning.

Key Features
High‑capacity 60GHz radio with 5GHz backup
True duplex gigabit PtP links up to 15km
PtMP mode: CPE with Wave‑AP (8km) or Wave‑APM (6km)
Aggregate throughput up to 5.4Gbps
Integrated GPS and precision mount bracket
Built‑in Bluetooth management radio for easy setup
2 × 2.5Gbps Ethernet ports + 1 × 10Gbps SFP+ uplink
Antenna gain: 60GHz 46dBi; 5GHz 22dBi
Beamwidth: 60GHz 1.3°; 5GHz 8°
Max power consumption: 26W
Operating temperature: –40°C to 60°C
Dimensions: Ø424.4 × 166.2 mm
Net weight: 4kg
Gross shipping weight: 5.0–5.5 kg (including packaging)

Note: Firmware v3.2.0 or later required for PtP links

Technical Specifications
Feature Details
Product Code WAVE‑PRO
Antenna Gain 60GHz: 46dBi; 5GHz: 22dBi
Beamwidth 60GHz: 1.3°; 5GHz: 8°
Data Rate 60GHz: up to 5.4Gbps; 5GHz: 800Mbps
Ethernet Ports 2 × 10/100/1000/2500
SFP+ Port 1 × 10Gbps
Hardware Button Reset
Max Power Consumption 26W
Mounting Pole‑mount
Operating System airOS
Operating Temp –40°C to 60°C
PoE Input 44–54V or 22–27V Passive PoE
PoE Output None
Power Input 48V 0.65A Gigabit PoE Injector (included)
Dimensions Ø424.4 × 166.2 mm
Net Weight 4kg
Gross Shipping Weight 5.0–5.5 kg

What’s Included
1 × Ubiquiti Wave‑Pro Radio
1 × 48V 0.65A Gigabit PoE Injector
Precision alignment tool
Pole‑mounting kit
User documentation

Ubiquiti's WAVE-PICO is a 60GHz radio system with an integrated high-gain antenna, and a WiFi 6, 5GHz backup radio. It features Wave technology with true duplex gigabit performance PtP links up to 3km. In PtMP mode, it can be used as a CPE and paired with the WAVE-AP (up to 1.3km) or WAVE-APM (900m) with a total throughput of up to 2Gbps.

Also included is a built-in Bluetooth management radio for easy setup via the UISP network management platform. An alignment tool is included with the unit to assist with accurate and reliable aligning of the antennas.

*Note: For P2P links, firmware v.3.2.0 or later is required.

Specifications

Antenna Gain: 60GHz: 27.7dBi; 5.8GHz: 9dBi
Beamwidth: 60GHz: 6°; 5GHz: 50°
Data Rate: 60GHz: Up to 2Gbps ; 5.8GHz: 800Mbps
Ethernet Ports: 1x 10/100/1000
Hardware Button: Reset
Max. Power Consumption: 10W
Mounting: Pole-Mount
Operating System: airOS
Operating Temperature: -40°C to 60°C
PoE Input: 24V or 48V Passive PoE
PoE Output: None
Power Input: 48V 0.5A, Gigabit PoE Injector (Included)
Serial Interface: None
SFP Ports: None
SIM Slots: None
Supported Voltage Range: 44–54V or 22–27V Passive PoE
USB Ports: None
Dimensions: Ø152.1 x 55.8 mm
Weight: 347g

Ubiquiti's WAVE-NANO is a 60GHz radio system with an integrated high-gain antenna, GPS, and a 5GHz backup radio. It features Wave technology with true duplex gigabit performance P2P links up to 12 km. In PtMP mode, it can be used as a CPE and paired with the WAVE-AP (up to 5km) or WAVE-APM (4km) with a total throughput of up to 2Gbps.

Also included is a built-in Bluetooth management radio for easy setup via the UISP network management platform. An alignment tool is included with the unit to assist with accurate and reliable aligning of the antennas.

*Note: For P2P links, firmware v.3.2.0 or later is required.

Specifications

Antenna Gain: 60GHz: 41dBi; 5.8GHz: 19dBi
Beamwidth: 60GHz: 1° ; 5GHz: 17°
Data Rate: 60GHz: Up to 2Gbps; 5.8GHz: 800Mbps
Ethernet Ports: 1x 10/100/1000
Hardware Button: Reset
Max. Power Consumption: 18W
Mounting: Pole-Mount
Operating System: airOS
Operating Temperature: -40°C to 60°C
PoE Input: 24V or 48V Passive PoE
PoE Output: None
Power Input: 48V 0.65A Gigabit PoE Injector (included)
Serial Interface: None
SIM Slots: None
Supported Voltage Range: 24V or 48V
USB Ports: None
Dimensions: Ø256.5 x 113.5 mm
Weight: 1.2kg

Ubiquiti's WAVE-LR is a long-range 60GHz radio system with an integrated high-gain antenna, GPS, precision mount bracket, and a 5GHz backup radio. It features Wave technology with true duplex gigabit performance PtP links up to 15 km. In PtMP mode, it can be used as a CPE and paired with the WAVE-AP (up to 8km) or WAVE-APM (6km) with a total throughput of up to 2Gbps.

Also included is a built-in Bluetooth management radio for easy setup via the UISP network management platform. An alignment tool is included with the unit to assist with accurate and reliable aligning of the antennas.

*Note: For PtP links, firmware v.3.2.0 or later is required.

Specifications

Antenna Gain: 60GHz: 46dBi; 5.8GHz: 22dBi
Beamwidth: 60GHz: 1.1°; 5GHz: 10°
Data Rate: 60GHz: Up to 2Gbps; 5.8GHz: 800Mbps
Ethernet Ports: 1x 10/100/1000
Hardware Button: Reset
Max. Power Consumption: 18W
Mounting: Pole-Mount
Operating System: airOS
Operating Temperature: -40°C to 60°C
PoE Input: 24V or 48V Passive PoE
PoE Output: None
Power Input: 48V 0.65A Gigabit PoE Injector (included)
Serial Interface: None
SIM Slots: None
Supported Voltage Range: 24V or 48V
USB Ports: None
Dimensions: Ø424.4 x 166.2mm
Weight: 2.59kg

Ubiquiti's WAVE-AP is a UISP 60GHz Point-to-MultiPoint Access Point featuring 5GHz failover, 1x 10Gbps SFP+ Port, 1x 2.5Gbps Ethernet Port and an integrated GPS antenna. Utilizing 60GHz point-to-multipoint technology, it can connect up to 15 stations with a total throughput of 5.4Gbps at distances of up to 1.3km when paired with the WAVE-PICO, 5km when paired with the WAVE-NANO, and 8km when paired with the WAVE-LR.

The dedicated Bluetooth radio allows for easy set-up via the UISP network management platform.

Specifications

Antenna Gain: 60GHz: 24dBi; 5.8GHz: 12dBi
Beamwidth: 60GHz/5GHz: 30°
Data Rate: 60GHz: Up to 5.4Gbps ; 5.8GHz: 800Mbps
Ethernet Ports: 1x 2.5Gbps
Hardware Button: Reset
Max. Power Consumption: 24W
Mounting: Pole-Mount
Operating System: airOS
Operating Temperature: -40°C to 60°C
PoE Input: 24V or 48V Passive PoE
PoE Output: None
Power Input: 48V 0.65A 2.5GbE PoE Injector (included)
Serial Interface: None
SIM Slots: None
Supported Voltage Range: 44–54V or 22–27V
USB Ports: None
Other: 1x SFP+
Dimensions: 212 x 205 x 187mm
Weight: 2.3kg

Brand: Ubiquiti
Product Code: WAVE‑APM
Description: Ubiquiti UISP 60GHz/5GHz PtMP Wave Access Point Micro

Product Overview
The Ubiquiti Wave‑AP Micro (WAVE‑APM) is a compact Point‑to‑MultiPoint (PtMP) access point designed for high‑capacity 60GHz deployments with 5GHz failover. Featuring 1 × 2.5Gbps Ethernet port and an integrated GPS antenna, it supports up to 15 stations with a total throughput of 5Gbps. Distances vary depending on the paired CPE: 900m with Wave‑Pico, 4km with Wave‑Nano, and 6km with Wave‑LR. For full coverage, up to 4 Wave‑APM units can be mounted using the Wave‑MM bracket to achieve 360° sector coverage. The built‑in Bluetooth management radio ensures easy setup via the UISP platform.

Key Features
60GHz PtMP access point with 5GHz failover
Connects up to 15 stations
Throughput up to 5Gbps
Range: 900m (Wave‑Pico), 4km (Wave‑Nano), 6km (Wave‑LR)
Mount up to 4 units with Wave‑MM for 360° coverage
Integrated GPS antenna for synchronization
Built‑in Bluetooth management radio for easy setup
1 × 2.5Gbps Ethernet port
Antenna gain: 60GHz 20dBi; 5GHz 13.5dBi
Beamwidth: 90° (60GHz/5GHz)
Max power consumption: 24W
Operating temperature: –40°C to 60°C
Dimensions: 284 × 156 × 76 mm
Net weight: 1.3kg

Gross shipping weight: 2.0–2.3 kg (including packaging)

Technical Specifications
Feature Details
Product Code WAVE‑APM
Antenna Gain 60GHz: 20dBi; 5GHz: 13.5dBi
Beamwidth 90°
Data Rate 60GHz: up to 5.4Gbps; 5GHz: 800Mbps
Ethernet Ports 1 × 2.5Gbps
Hardware Button Reset
Max Power Consumption 24W
Mounting Pole‑mount or Wave‑MM for 360° coverage
Operating System airOS
Operating Temp –40°C to 60°C
PoE Input 24V or 48V Passive PoE
PoE Output None
Power Input 48V 0.65A 2.5GbE PoE Injector (included)
Dimensions 284 × 156 × 76 mm
Net Weight 1.3kg
Gross Shipping Weight 2.0–2.3 kg

What’s Included
1 × Ubiquiti Wave‑AP Micro (WAVE‑APM)
1 × 48V 0.65A 2.5GbE PoE Injector
Pole‑mounting kit
User documentation

Brand: Ubiquiti
Product Code: UISP‑HORN
Description: Ubiquiti UISP 5GHz 19dBi 30° Horn Antenna

Product Overview
The Ubiquiti UISP‑HORN is a high‑isolation 5GHz horn antenna designed for seamless integration with Ubiquiti radios. Featuring 19.5dBi gain and a 30° beamwidth, it delivers focused coverage with minimal interference, making it ideal for co‑location deployments. The antenna supports a wide frequency range from 5.15GHz to 6.875GHz and is engineered with low back lobes to reduce noise and improve performance. Built for durability, it includes a WaveGuide adapter and withstands wind loading up to 90N at 200km/h.

Key Features
5GHz horn antenna with 19.5dBi gain
30° beamwidth for focused coverage
High isolation design with low back lobes
Wide frequency range: 5.15GHz – 6.875GHz
Vertical & horizontal polarization
Includes WaveGuide adapter for easy integration
Wind loading: 90N @ 200km/h
Dimensions: 282 × 224 × 380 mm
Net weight: 3.98kg
Gross shipping weight: 5.0–5.5 kg (including packaging)

Note: Radio not included

Technical Specifications
Feature Details
Product Code UISP‑HORN
Antenna Gain 19.5dBi
Beamwidth 30°
Frequency Range 5.15 – 6.875GHz
Polarization Vertical & Horizontal
Connector WaveGuide Adapter (included)
Wind Loading 90N @ 200km/h
Dimensions 282 × 224 × 380 mm
Net Weight 3.98kg
Gross Shipping Weight 5.0–5.5 kg

What’s Included
1 × Ubiquiti UISP‑HORN Antenna
1 × WaveGuide Adapter
User documentation

Ubiquiti's UACC-PM is an easy-to-install wall mount bracket for the U7-PRO or U6-PRO.
Specifications
Dimensions: 174 x 189 x 30 mm
Weight: 136g

🏢 Professional Wi-Fi for Small Businesses & Homes

✅ 300Mbps Wireless N (2.4GHz) – Smooth browsing & HD streaming
✅ Ceiling/Wall Mount Design – Discreet installation with included hardware
✅ Passive PoE Support (24V) – Single-cable power & data (injector not included)
✅ Omada SDN Compatible – Centralized management via Omada Controller

🔧 Key Features

✔ Multiple SSIDs (Up to 8) – Separate networks for guests, staff, or IoT devices
✔ Enterprise Security – WPA2 encryption, MAC filtering, VLAN support
✔ Scheduled Reboots – Maintains optimal performance
✔ QoS (WMM) – Prioritizes video/voice traffic

📊 Technical Specifications

Category Specification
Model EAP110
Wi-Fi Standard 802.11n (Wi-Fi 4)
Antennas 2× internal (3dBi)
Ethernet 1× Fast Ethernet (100Mbps)
PoE Support Passive PoE (24V)
Coverage Up to 650 sq. ft.
Dimensions 7.1×7.1×1.9 in (180×180×47.5 mm)
Warranty 2-year limited

**🏢 Ideal For:

✔ Small offices & retail stores
✔ Hotels & dormitories
✔ Home Wi-Fi extension
✔ Surveillance camera networks

**📦 What's Included?

EAP110 Access Point
Ceiling/wall mount kit
Quick start guide

"Affordable, reliable Wi-Fi for small spaces—perfect for businesses needing simple, scalable coverage!"

**⚙️ Pro Tips:

Use shielded Ethernet cables for long-distance PoE runs
Enable automatic channel selection to avoid interference
Pair with Omada Controller for multi-AP management

**🔍 Why Choose EAP110?

✔ Budget-friendly for basic Wi-Fi needs
✔ Easy to install with included mounting kit
✔ Works standalone or with Omada SDN

*(For faster speeds, consider the EAP225 Wi-Fi 5 model)*

🚀 Next-Gen Wi-Fi 6 for Your Entire Home

✅ AX1800 Dual-Band Wi-Fi 6 – 1201Mbps @5GHz + 574Mbps @2.4GHz
✅ Whole-Home Coverage – 2 units cover up to 4,000 sq. ft.
✅ Seamless Roaming – No drop-offs as you move around
✅ OFDMA & MU-MIMO – Handles 150+ devices efficiently

🔧 Key Features

✔ Easy Setup – Guided installation via Deco app
✔ Parental Controls – Manage screen time & block content
✔ AI-Driven Mesh – Automatically optimizes connections
✔ Works with Alexa – Voice control for your network

📊 Technical Specifications

Category Specification
Model Deco X20 (2-Pack)
Wi-Fi Standard 802.11ax (Wi-Fi 6)
Coverage Up to 4,000 sq. ft. (2 units)
Ethernet Ports 2× Gigabit per unit (WAN/LAN auto-sensing)
Security WPA3, SPI Firewall, Guest Network
Dimensions 4.33 × 4.33 × 4.72 in (110 × 110 × 120 mm)
Warranty 2-year limited

**🏡 Ideal For:

✔ Large homes (3-5 bedrooms)
✔ Smart homes with 100+ devices
✔ 4K streaming & gaming
✔ Remote work & video calls

**📦 What's Included?

2× Deco X20 units
2× Power adapters
1× Ethernet cable
Quick start guide

"Future-proof Wi-Fi 6 coverage—eliminate dead zones with seamless mesh technology!"

**⚙️ Pro Tips:

Place units centrally for optimal coverage
Use Ethernet backhaul for fastest speeds (if possible)
Enable QoS in the Deco app to prioritize gaming/streaming

**🔍 Why Choose Deco X20?

✔ 40% faster than Wi-Fi 5 mesh systems
✔ Easy app management (even for non-tech users)
✔ Compact, stylish design blends into any home
*(For tri-band or higher speeds, see Deco X60/X90 models)*

🏠 Complete Wi-Fi Coverage for Your Home

✅ AC1200 Dual-Band Wi-Fi – 867Mbps @5GHz + 300Mbps @2.4GHz
✅ Whole-Home Mesh – 3 units cover up to 2,800 sq. ft.
✅ Seamless Roaming – No disconnections as you move around
✅ Easy Setup – Deco app guides installation in minutes

🔧 Key Features

✔ Beamforming & MU-MIMO – Stronger signal for multiple devices
✔ Parental Controls – Manage screen time & block inappropriate content
✔ Guest Network – Secure Wi-Fi for visitors
✔ Ethernet Backhaul Support – For faster, more stable connections

📊 Technical Specifications

Category Specification
Model Deco M4 (3-Pack)
Wi-Fi Standard 802.11ac (Wi-Fi 5)
Coverage Up to 2,800 sq. ft. (3 units)
Ethernet Ports 2× Gigabit per Deco (WAN/LAN auto-sensing)
Security WPA2, SPI Firewall, Guest Network
Dimensions 3.6 × 3.6 × 7.5 in (90.7 × 90.7 × 190 mm)
Warranty 1-year limited

**🏡 Ideal For:

✔ Medium to large homes (3-5 bedrooms)
✔ Families needing parental controls
✔ Gamers & streamers wanting stable connections
✔ Smart homes with 100+ devices

**📦 What's Included?

3× Deco M4 units
3× Power adapters
1× Ethernet cable
Quick start guide

"Say goodbye to dead zones—enjoy seamless Wi-Fi in every corner of your home!"

**⚙️ Pro Tips:

Place units evenly for optimal coverage
Use Ethernet backhaul for faster speeds (if possible)
Enable QoS in the Deco app to prioritize gaming/streaming

**🔍 Why Choose Deco M4?

✔ Affordable whole-home coverage
✔ Easy app management (even for non-tech users)
✔ Works with Alexa for voice control

*(For Wi-Fi 6 or tri-band options, see Deco X60 or X90 models)*

🏠 Whole-Home Wi-Fi Made Simple

✅ AC1200 Dual-Band Wi-Fi – 300Mbps @2.4GHz + 867Mbps @5GHz
✅ Seamless Roaming – No disconnections as you move around your home
✅ Easy Setup – Deco app guides you through installation in minutes
✅ 2× Ethernet Ports per Unit – Connect wired devices like smart TVs or gaming consoles

🔧 Key Features

✔ Adaptive Routing – Automatically selects the fastest connection path
✔ Parental Controls – Manage screen time and block inappropriate content
✔ Guest Network – Secure Wi-Fi for visitors
✔ Works with Alexa – Voice control for your network

📊 Technical Specifications

Category Specification
Model Deco M4 (1-Pack)
Wi-Fi Standard 802.11ac (Wi-Fi 5)
Coverage Up to 1,500 sq. ft. per unit
Ethernet Ports 2× 10/100Mbps per Deco
Security WPA2 encryption
Dimensions 4.33 × 4.33 × 2.36 in (110 × 110 × 60 mm)
Warranty 2-year limited

**🏡 Ideal For:

✔ Small to medium-sized homes (1,500 sq. ft.)
✔ Families needing parental controls
✔ Users with multiple smart home devices
✔ Renters who can’t modify existing routers

**📦 What's Included?

1× Deco M4 unit
Power adapter
Ethernet cable
Quick start guide

"Eliminate dead zones with a simple, reliable mesh system—perfect for homes under 1,500 sq. ft.!"

**⚙️ Pro Tips:

Place centrally for best coverage
Use Ethernet backhaul if possible for faster speeds
Add more units (sold separately) for larger homes

**🔍 Why Choose Deco M4?

✔ Affordable entry point to mesh Wi-Fi
✔ Easy app-based management
✔ Compact, discreet design blends into any room

*(For Wi-Fi 6 or gigabit speeds, see Deco X20 or X60 models)*