MikroTik's RB-CSS610 is a SwOS Lite Cloud Smart Switch featuring 8x Gigabit Ethernet ports, 2x 10Gbps SFP+ ports and can be powered by either DC Jack or 12-57V PoE. Powered by SwOS, the unit is configurable from a web browser and provides all the basic functionality of a managed switch. Additional features include port-to-port forwarding, MAC filters, VLANs, mirror traffic, applying bandwidth limitation and even adjusting some MAC and IP header fields.

Specifications

Ethernet Ports: 8x 10/100/1000
Hardware Button: Reset
Max. Power Consumption: 5W
Mounting: Rack-Mount
Operating System: SwOS Lite
Operating Temperature: -20°C to 60°C
PoE Input: 12V-57V (Passive PoE)
PoE Output: None
Power Input: 24V 0.8A Power Supply (Included)
Processor: Switch Chip
Serial Interface: None
SFP Ports: 2x 10Gbps
Supported Voltage Range: 12-57V
System Memory: 64KB
USB Ports: None
Other: None
Dimensions: 200 x 167 x 46 mm

MikroTik's RB-CSS326 is SwOS Cloud Smart Switch featuring 24x Gigabit Ethernet ports and 2x 10Gbps SFP+ 10Gbps ports. Powered by SwOS, the unit is configurable from a web browser and provides all the basic functionality of a managed switch. Additional features include port-to-port forwarding, MAC filters, VLANs, mirror traffic, applying bandwidth limitation and even adjusting some MAC and IP header fields

Specifications

Ethernet Ports: 24x 10/100/1000
Hardware Button: Reset
Max. Power Consumption: 19W
Mounting: Rack-Mount
Operating System: SwOS
Operating Temperature: -20°C to 70°C
PoE Input: 10V-30V (Passive PoE)
PoE Output: None
Power Input: 24V 1.2A Power Supply (Included)
Processor: Switch Chip
Serial Interface: None
SFP Ports: 2x 10Gbps
Supported Voltage Range: 10V-30V
System Memory: 2MB
USB Ports: None
Other: None
Dimensions: 440 x 144 x 44mm

Cudy's CD-GS105P is a 5 Port Gigabit switch with 4x 802.3af/at PoE ports, 1x Gigabit Uplink port and a 31W PoE Budget. Both VLAN and Extender modes are supported with the integrated toggle switch. VLAN mode enables port isolation on ports 1-4, while Extender mode increases the transmission distance on ports 1-4 to 250m at 10Mbps. The watchdog function continuously monitors PoE connections when enabled. If an error is detected on the device, the switch immediately restarts the port.

Specifications

Ethernet Ports: 5x 10/100/1000
Hardware Button: VLAN; Extender; Watchdog
Max. Power Consumption: 5W
Mounting: Desktop or Wall-Mount
Operating System: None
Operating Temperature: 0°C to 40°C
PoE Input: None
PoE Output: 802.3af/at PoE on Ports 1~4
Power Input: 1x IEC Power Cord (Included)
Serial Interface: None
SFP Ports: None
Supported Voltage Range: 100-240V
Dimensions: 119 x 85 x 28mm
Weight: 254g

Ubiquiti's USW-PRO-HD24 is a professional-grade, high-performance Layer 3 Etherlighting™ switch with 2x 10Gbps Ports, 22x 2.5Gbps Ports and 4x 10G SFP+ ports. It also features a 1.3' touchscreen with AR switch management, layer 3 switching features and can be configured and managed with the UniFi Network Application.

Specifications

Ethernet Ports: 22x 10/100/1000/2500; 2x 10/100/100/2500/10000
Hardware Button: Reset
Max Power Consumption: 60W
Mounting: Rack-Mount
Operating System: UniFi
PoE Input: None
PoE Output: None
Power Input: 1x IEC Power Cord (Included)
Serial Interface: None
SFP Ports: 4x 10Gbps
Supported Voltage Range: 100 to 240V AC
Dimensions: 442 x 285 x 44 mm

Ubiquiti's USW-8FLEX-2.5GP is an indoor, compact, 8 Port 2.5Gbps 802.3bt PoE switch that can be powered via PoE or the UACC-PSU-210W AC power adapter (Not Included). It also features a 10Gbps Ethernet or 10Gbps SFP+ combination uplink port.

It can be configured and managed with the UniFi Network Application.

Specifications

Ethernet Ports: 8x 10/100/1000/2500; 1x 10/100/1000/10000 (Combo)
Hardware Button: None
Max. Power Consumption: PoE: 14W; PSU: 17W
Mounting: Desktop
Operating System: UniFi
Operating temperature: 20 to 45°C
PoE Input: 802.3bt (PoE+++) on Port 8
PoE Output: 802.3at PoE++)
Power Input: 802.3bt (PoE+++) or UACC-PSU-210W (Not Included)
Serial Interface: None
SFP Ports: 10Gbps SFP+ (Combo)
Supported Voltage Range: 50-57V
Dimensions: 212.9 x 99.4 x 33.5 mm
Weight: 567g

Brand: Ubiquiti
Product Code: USW‑8FLEX‑2.5G
Description: Ubiquiti UniFi Flex 2.5G 8 Port 2.5G with 10G Combo Uplink

Product Overview
The Ubiquiti UniFi Flex 2.5G (USW‑Flex‑2.5G‑8) is a compact, indoor managed switch designed for high‑performance networking. Featuring 8 × 2.5Gbps Ethernet ports and a 10Gbps Ethernet/SFP+ combo uplink port, it delivers flexible connectivity for modern networks. Powered via PoE+ or the included USB‑C adapter, the switch offers versatile installation options including desktop, wall‑mount, or DIN rail (DIN kit not included). Managed through the UniFi Network Application, it integrates seamlessly into UniFi environments for easy configuration and monitoring.

Key Features
8 × 2.5Gbps Ethernet ports
1 × 10Gbps Ethernet/SFP+ combo uplink port
Compact indoor design with desktop, wall, or DIN mounting options
Powered via PoE+ (802.3at) or USB‑C adapter (included)
Max power consumption: 14W (PoE or PSU)
Operating temperature: –20°C to 45°C
Dimensions: 212.9 × 76 × 33.5 mm
Net weight: 395g
Gross shipping weight: 0.8–1.0 kg (including packaging)

Technical Specifications
Feature Details
Product Code USW‑8FLEX‑2.5G
Ethernet Ports 8 × 10/100/1000/2500
Combo Port 1 × 10/100/1000/2500/10000 (Ethernet or SFP+)
Hardware Button None
Max Power Consumption 14W
Mounting Desktop, wall‑mount, DIN (not included)
Operating System UniFi
Operating Temp –20°C to 45°C
PoE Input 802.3at (PoE+) on Port 9
PoE Output None
Power Input USB‑C 5V 3A or PoE+
Serial Interface None
Dimensions 212.9 × 76 × 33.5 mm
Net Weight 395g
Gross Shipping Weight 0.8–1.0 kg

What’s Included
1 × Ubiquiti UniFi Flex 2.5G 8 Port Switch
1 × USB‑C power adapter
Mounting accessories (wall/desktop)
User documentation

Ubiquiti's NS4 is an unmanaged, outdoor, 4 port Gigabit switch with PoE passthrough. If powered by 24V Passive PoE can provide up to 24W of power on three PoE out ports. The NanoSwitch is designed for outdoor deployment and supports up to 4 Gbps total, non-blocking line rate.

*Note: PoE Injector not Included.

Specifications

Ethernet Ports: 4x 10/100/1000
Max. Power Consumption: 30W
Mounting: Wall or Pole Mount
Operating Temperature: -30C ~ 70C
PoE Input: Passive 24V PoE
PoE Output: 24V Passive PoE Pass-through
Power Input: 24V Passive PoE (Not Included)
Supported Voltage Range: 21.6 - 30V
Dimensions: 196.4 x 93.5 x 32.4mm
Weight: 271g

Reyee 10-Port Gigabit Smart Cloud Managed PoE Switch | RG-ES210GS-P

Highlight Features

9-Port gigabit cloud managed switch with 8 PoE+ ports
Cost-Effective Smart Cloud Managed Switches
IP Camera Recognition, Unique Value for CCTV Network
Automatic Loop Prevention Ensures Service Continuity
Lifetime management on Ruijie Cloud at anytime anywhere

Reyee 10 Port Multi-Gigabit Layer 3 Managed Switch with 8 PoE++ Ports and 2 SFP+ Uplink Ports | RG-NBS5300-8MG2XS-UP

Features 10 multi-gigabit ports, including 8 PoE++ ports compliant with 802.3bt/at/af standards, and 2 SFP+ uplink ports, ensuring a versatile and robust connectivity solution. The 2.5 Gbps ports shatter the Gigabit barrier, seamlessly integrating with WiFi 6 APs to unleash their full potential.

With a total power supply of 370W for PoE++ ports, this switch is an ideal choice for high-demand network environments. Advanced security features like IP-MAC-Port Binding, ACL, Port Security, and DoS Defend, coupled with Storm Control, DHCP Snooping, and 802.1X with Radius Authentication, ensure a secure and reliable network. The Reyee RG-NBS5300 series switches offer lifetime management through the Ruijie Cloud portal, providing ease of access and control from anywhere at any time.

Highlight Features

2.5 Gbps ports smash the gigabit barrier and unlock the full potential of WiFi 6 APs.
802.3bt/at/af-compliant PoE++ ports with a total power supply of 370W.
IP-MAC-Port Binding, ACL, Port Security, DoS Defend, Storm Control, DHCP Snooping, 802.1X, Radius Authentication.
Lifetime management on Ruijie Cloud at any time anywhere.

Reyee Cloud - Making Your Business Easier

SON, zero touch provisioning to Cloud
Monitor switch statistics at anytime and anywhere
Configure VLANs on Ruijie Cloud APP
Easy maintenance, save onsite time and cost

MikroTik Cloud Smart Switch CSS326-24G-2S+RM

The Cloud Smart Switch 326-24G-2S+RM is powered by a Marvell DX switch chip. The device is running an operating system designed specifically for MikroTik switch products - SwitchOS.

SwOS is configurable from your web browser. It gives you all the basic functionality for a managed switch, plus more: allows you to manage port-to-port forwarding, apply MAC filtering, configure VLANs, mirror traffic, apply bandwidth limitations and even adjust some MAC and IP header fields. The SFP cage supports both 1.25 Gb SFP and 10 Gb SFP+ modules.


Product Features:


Non-blocking Layer 2 switching capacity
16K host table
IEEE 802.1Q VLAN
Supports up to 4K simultaneous VLANs
Port isolation
Port security
Broadcast storm control
Port mirroring of ingress/egress traffic
Rapid Spanning Tree Protocol
Access Control List
MikroTik neighbor discovery
SNMP v1
Web-based GUI

RouterBoard Specs

RouterBoard CPU Powered by a Marvell DX switch chip (98DX3216A1)
Wired Interfaces 24x Gigabit Ethernet Ports, 2x SFP+ Slots
DC Power Yes - 12-30V DC
PoE Yes, PoE input on Eth1 (12-30V DC - Non 802.3af PoE)
Operating System MikroTik SwitchOS

Specifications:
Ethernet Ports: 24x 10/100/1000
Hardware Button: Reset
Max. Power Consumption: 19W
Mounting: Rack-Mount
Operating System: SwOS
Operating Temperature: -20°C to 70°C
PoE Input: 10V-30V (Passive PoE)
PoE Output: None
Power Input: 24V 1.2A Power Supply (Included)
Processor: Switch Chip
Serial Interface: None
SFP Ports: 2x 10Gbps
Supported Voltage Range: 10V-30V
System Memory: 2MB
USB Ports: None
Other: None
Weight & Dimensions
W : 20 cm
L : 56 cm
H : 7 cm
Weight: 1720 g

Reyee's RG-ES210GSP is a 10 port Layer 2 Gigabit smart switch with 8x 802.3af/at PoE ports, 2x Gigabit Ethernet uplink ports and 1x SFP Combination Port. The switch offers a 120W PoE budget and up to 30W per PoE port. It supports Ruijie’s smart networking feature, which with Ruijie's free cloud service allows users to quickly and easily auto-provision, deploy and manage devices remotely. Use the Reyee auto-discovery feature or scan the QR code using the mobile application to easily add devices to new or existing projects via the cloud.

Specifications

Ethernet Ports: 10x 10/100/1000
Hardware Button: None
Max. Power Consumption: 10W
Mounting: Desktop or Wall Mount
Operating System: None
Operating temperature: 0°C to 40°C
PoE Input: None
PoE Output: 802.3af/at on Ports 1 to 8
Power Input: 54V 2.4A Power Supply (Included)
Serial Interface: None
SFP Ports: 1x SFP Combo Port
Supported Voltage Range: 54V

Dimensions: 202 x 108 x 28mm
Weight: 539g

Ubiquiti's USW-ULTRA is a compact Layer 2 switch featuring 8 Gigabit Ports with 1x PoE input, 7x PoE output, and a PoE budget dependent on the power source.

It can be configured and managed with the UniFi Network Application.

*Note: Power Supply not included.

Specifications

Ethernet Ports: 8x 10/100/1000
Hardware Button: Reset
Max. Power Consumption: 8W (Using a Power Supply) 9W (Using a PoE Adapter)
Mounting: Desktop or Wall Mount
Operating System: UniFi
Operating Temperature: PoE++ input: -30 to 60°C ; 60W AC input: -20 to 45°C ; 210W AC input: -20 to 60°C
PoE Input: 802.3af/at/bt
PoE Output: 802.3af/at on Ports 2~8
Power Input: 802.3af/at/bt on Port 1 ; 44-57V DC terminal ; 57V Power Supply (Not Included)
Serial Interface: None
SFP Ports: None
Supported Voltage Range: 44–57V
Dimensions: 203 x 76 x 33 mm
Weight: 320g

Ubiquiti's USW-U60 is a compact Layer 2 switch featuring 8 Gigabit Ports with 1x PoE input, 7x PoE output, and a PoE budget of 52W when powered with the included Power Supply.

It can be configured and managed with the UniFi Network Application.

Specifications

Ethernet Ports: 8x 10/100/1000
Hardware Button: Reset
Max. Power Consumption: 8W (with included power supply)
Mounting: Desktop or Wall Mount
Operating System: UniFi
Operating Temperature: -20°C to 45°C (when powered with included power supply)
PoE Input: 802.3af/at/bt
PoE Output: 802.3af/at on Ports 2~8
Power Input: 802.3af/at/bt on Port 1
Serial Interface: None
SFP Ports: None
Supported Voltage Range: 44–57V
Dimensions: 203 x 76 x 33 mm
Weight: 320kg

Ubiquiti's USW-U210 is a compact Layer 2 switch featuring 8 Gigabit Ports with 1x PoE input, 7x PoE output, and a PoE budget of 202W when powered with the included Power Supply.

It can be configured and managed with the UniFi Network Application.

Specifications

Ethernet Ports: 8x 10/100/1000
Hardware Button: Reset
Max. Power Consumption: 8W (With Included Power Supply)
Mounting: Desktop or Wall Mount
Operating System: UniFi
Operating Temperature: -20°C to 60°C (When Powered With Included Power Supply)
PoE Input: 802.3af/at/bt
PoE Output: 802.3af/at on Ports 2~8
Power Input: PoE: 802.3af/at/bt on Port 1 ; DC: 54V, 3.9A
Serial Interface: None
SFP Ports: None
Supported Voltage Range: PoE: 44–57V ; DC: 54V
Dimensions: 203 x 76 x 33 mm
Weight: 1.35kg

Ubiquiti's USW-PRO8P is a fully managed 8-Port Gigabit Layer 3 UniFi switch. It has 6x 802.3at PoE+ Ports, 2x 802.3bt PoE++ Ports, 2x 10Gbps SFP+ and a PoE budget of 120W. It features innovative near-silent cooling and a 1.3" touch LCM (Liquid Crystal Monitor) to provide status information.

It can be configured and managed with the UniFi Network Application.

Specifications

Ethernet Ports: 8x 10/100/1000
Hardware Button: Reset
Max. Power Consumption: 30W
Mounting: Desktop
Operating System: UniFi
Operating Temperature: -5°C to 45°C
PoE Input: None
PoE Output: 6x 802.3af/at ; 2x 802.3bt
Power Input: 1x IEC Power Cord (Included)
Serial Interface: None
SFP Ports: 2x 10Gbps
Supported Voltage Range: 100V to 240V
Dimensions: 200 x 248 x 44mm
Weight: 2.1kg

Ubiquiti's USW-PRO48 is a fully managed Layer 3 switch with 48x Gigabit Ethernet Ports and 4x 10Gbps SFP+ Uplink Ports. It features innovative near-silent cooling and a 1.3" touch LCM (Liquid Crystal Monitor) to provide status information.

It can be configured and managed with the UniFi Network Application.

Specifications

Ethernet Ports: 48x 10/100/1000
Hardware Button: Reset
Max. Power Consumption: 60W
Mounting: Rack-Mount
Operating System: UniFi
Operating temperature: -5°C to 45°C
PoE Input: None
PoE Output: None
Power Input: 1x IEC Power Cord (Included)
Serial Interface: None
SFP Ports: 4x 10Gbps
Supported Voltage Range: 100 to 240VAC
Dimensions: 442.4 x 285.4 x 43.7 mm
Weight: 4.09kg

Ubiquiti’s USW-PRO48P is a fully managed 48-Port Gigabit Layer 3 UniFi Switch. It has 40x 802.3at PoE+ Ports, 8x 802.3bt PoE++ Ports, 4x 10Gbps SFP+ and a PoE budget of 600W. It features innovative near-silent cooling and a 1.3" touch LCM (Liquid Crystal Monitor) to provide status information.

It can be configured and managed with the UniFi Network Application.

Specifications

Ethernet Ports: 48x 10/100/1000
Hardware Button: Reset
Max. Power Consumption: 60W
Mounting: Rack-Mount
Operating System: UniFi
Operating Temperature: -5°C to 40°C
PoE Input: None
PoE Output: Ports 1~40 802.3af/at ; Ports 41~48 802.3bt
Power Input: 1x IEC Power Cord (Included)
Serial Interface: None
SFP Ports: 4x 10Gbps
Supported Voltage Range: 100 to 240VAC
Dimensions: 442.4 x 399.6 x 43.7mm
Weight: 6.34kg

Ubiquiti's USW-PRO24 is a fully managed, Layer 3, UniFi switch with 24x Gigabit Ports and 2x 10G SFP+ uplink ports. It features innovative near-silent cooling and a 1.3" touch LCM (Liquid Crystal Monitor) to provide status information. It offers a rich set of layer 2 capabilities with integrated layer 3 functionality.

It can be configured and managed with the UniFi Network Application.

Specifications

Ethernet Ports: 24x 10/100/1000
Hardware Button: Reset
Max Power Consumption: 30W
Mounting: Rackmount
Operating System: UniFi
PoE Input: None
PoE Output: None
Power Input: 1x IEC Power Cord (Included)
Serial Interface: None
SFP Ports: 2x 10Gbps
Supported Voltage Range: 100 to 240VAC

Ubiquiti's USW-PRO24P is a fully managed 24-Port Gigabit Layer 3 UniFi switch. It has 16x 802.3at PoE+ Ports, 8x 802.3bt PoE++ Ports, 2x 10Gbps SFP+ and a PoE budget of 400W. It features innovative near-silent cooling and a 1.3" touch LCM (Liquid Crystal Monitor) to provide status information.

It can be configured and managed with the UniFi Network Application.

Specifications

Ethernet Ports: 24x 10/100/1000
Hardware Button: Reset
Max. Power Consumption: 50W
Mounting: Rack-Mount
Operating System: UniFi
Operating Temperature: -5°C to 40°C
PoE Input: None
PoE Output: 16x 802.3af/at ; 8x 802.3bt
Power Input: 1x IEC Power Cord (Included)
Serial Interface: None
SFP Ports: 2x 10Gbps
Supported Voltage Range: 100V to 240V
Dimensions: 442.4 x 285.4 x 43.7mm
Weight: 4.39kg

Ubiquiti's USW-LITE8P is a fully managed, Layer 2, UniFi switch with 8x Gigabit Ethernet ports, 4x auto-sensing 802.3at PoE+ ports and a PoE budget of 52W. The device offers an extensive suite of advanced layer 2 switching protocols and features. A wall-mountable kit is included with the switch. The device is fan less, meaning that it will be silent no matter where it is used.

It can be configured and managed with the UniFi Network Application.

Specifications

Ethernet Ports: 8x 10/100/1000
Hardware Button: Reset
Max. Power Consumption: 8W
Mounting: Desktop or Wall-Mount
Operating System: UniFi
Operating Temperature: -15 to 40° C
PoE Input: None
PoE Output: 802.3af/at on Ports 1 to 4
Power Input: 54V 1A Power Supply (Included)
Serial Interface: None
SFP Ports: None
Supported Voltage Range: 50-57V
Dimensions: 99.6 x 163.7 x 31.7 mm
Weight: 450g