Cudy's CD-SFP-SM is a duplex module designed for Single Mode fiber deployments up to 20km at 1.25Gbps. Ideal for long-distance fiber links or to provide uplink between switches, routers and media converters.

*Note: This module is multi-vendor compatible.

Specifications

Connector: 2x LC
Data Rate: 1.25Gbps
Form Factor: SFP
Mode: Single Mode
Supported Distance: 20km
Wavelength: 1310nm

Cudy's CD-SFP-SMB is a pair of Bi-directional modules designed for Single Mode fiber deployments up to 20km at 1.25Gbps. Bi-directional SFP's reduce installation costs by utilizing a single fiber for duplex transmission by using two unique wavelengths for TX and RX on the same optical strand.

Modules are multi-vendor compatible.

Specifications

Connector: LC
Data Rate: 1.25Gbps
Form Factor: SFP (BiDi)
Mode: Single Mode
Supported Distance: 20km
Wavelength: 1310nm / 1550nm

Cudy's CD-SFP-MM is a duplex module designed for multi-Mode fiber deployments up to 500m at 1.25Gbps. Ideal for short-distance fiber links or to provide uplink between switches, routers and media converters.

*Note: This module is multi-vendor compatible.

Specifications

Connector: 2x LC
Data Rate: 1.25Gbps
Form Factor: SFP
Mode: Multi Mode
Supported Distance: 500m
Wavelength: 850nm

Ubiquiti's UACC-SM1GS is ideal for long-distance, bi-directional, single-mode connections. It can deliver up to 1.25Gbps speeds at distances of up to 3km.

These SFP modules make use of Wavelength-Division Multiplexing (WDM). This means it uses two different light wavelengths to transmit data in both directions at once, resulting in fewer fiber cables required to run. It also aids in maximizing the use of existing infrastructure and simplifying installations.

*Note: The price reflected is for a pair (one box of 2 units). This product is only sold as a pair, and no single units are available.

Specifications
Connector: 1x LC
Data Rate: 1.25Gbps
Form Factor: SFP (BiDi)
Mode: Single Mode
Supported Distance: 3km
Wavelength: 1310nm / 1550nm

Ubiquiti Single Mode (LC) SFP Module Pair
The UF-SM1G is ideal for long-distance, outdoor, bi-directional, single-mode fiber runs for distances of up to 3 km at 1 Gbps.
Outdoor Fiber Installations
For long-distance runs of 300+ meters, use UFiber 1G single-mode modules for maximum reuse of existing infrastructure.
UF-SM-1G-S
Supported Media Single-Mode Fiber
Connector Type (1) LC
BiDi ✓
TX Wavelength Blue1310 nm Yellow1550 nm
RX Wavelength Blue 1550 nm Yellow 1310 nm
Data Rate 1.25 Gbps SFP
Cable Distance 3 km
Pack Options 1-Pair

Ubiquiti's UACC-MM1G allows for multi-mode fiber connections delivering up to 1.25Gbps speeds at distances of up to 550m.

*Note: The price reflected is for a pair (one box of 2 units). This product is only sold as a pair, and no single units are available.

Specifications

Connector: 2x LC
Data Rate: 1.25Gbps
Form Factor: SFP
Mode: Multi Mode
Supported Distance: 550m
Wavelength: 850nm

Ubiquiti Multi Mode (LC) SFP Module Pair

The UF-MM1G is ideal for short-distance, outdoor, bi-directional, multi-mode fiber runs for distances of up to 550m at 1 Gbps.

Outdoor Fiber Installations

For short-distance runs of 300+ meters, use UFiber 1G multi-mode modules for maximum reuse of existing infrastructure.
UF-MM-1G-S
Supported Media Multi-Mode Fiber
Connector Type (1) LC
BiDi ✓
TX Wavelength
850 nm

RX Wavelength
850 nm

Data Rate 1.25 Gbps SFP
Cable Distance 550 m
Pack Options 1-Pair

Please note: This kit is only sold as a pair (one box with 2 units inside)

Ubiquiti 1Gbps RJ45 Copper SFP Module


Ubiquiti Networks offers a variety of U® Fiber modules to suit your fiber connectivity applications.


To connect copper Ethernet cables to SFP ports, use the UF-RJ45-10G in an SFP+ port for speeds of up to 10 Gbps and distances of up to 30 m, or use the UF-RJ45-1G in an SFP port for speeds of up to 1 Gbps and distances of up to 100m.
upported Media Copper
Connector Type RJ45
BiDi N/A
TX Wavelength N/A
RX Wavelength N/A
Data Rate 10/100/1000 Mbps
Cable Distance 100 m

Ubiquiti's UACC-RJ451G enables you to convert unused SFP+ Ports to 1G Ethernet RJ45 Ports.

*Note: The UACC-RJ451G module is not compatible with MikroTik devices.

Specifications
Connector: RJ45
Data Rate: 1.25Gbps
Form Factor: SFP
Mode: Copper
Supported Distance: 100m
Wavelength: None

UltraLAN 25G SFP28 BiDi Module Pair - SM 20KM 1270/1330nm


UltraLAN's SFP-BIDI transceivers are high performance, cost effective modules supporting dual data-rate of 25Gbps and 20km transmission distance with SMF.


The transceiver consists of three sections: a FP/DFB laser transmitter, a PIN photodiode integrated with a trans-impedance preamplifier (TIA) and MCU control unit. The transceivers are compatible with SFP Multi-Source Agreement (MSA) and SFF-8402.


Product Features:

Up to 25.78Gb/s data links
Bi-Directional LC connector
Hot pluggable SFP28 footprint
1270nm/1330nm DFB transmitter
Applicable for 20KM SMF connection
Low power consumption, <1.5W
Compliant to SFF-8402 for SFP28 solution
RoHS Compliant


Please note, as these are BiDi SFP Modules they are only sold in a pair.

UltraLAN 10G SFP BiDi Module Pair - SM 10KM 1270/1330nm


UltraLAN's SFP-BIDI transceivers are high performance, cost effective modules supporting dual data-rate of 10Gbps and 10km transmission distance with SMF.


The transceiver consists of three sections: a FP/DFB laser transmitter, a PIN photodiode integrated with a trans-impedance preamplifier (TIA) and MCU control unit. All modules satisfy class I laser safety requirements. The transceivers are compatible with SFP Multi-Source Agreement (MSA) and SFF-8472.


Product Features:

Supports 10G rates
Bi-Directional LC connector
Hot pluggable SFP footprint
Applicable for 10KM SMF connection
Low power consumption, < 0.8W
Digital Diagnostic Monitor Interface
Compliant with SFP MSA and SFF-8472
Very low EMI and excellent ESD protection


Please note, as these are BiDi SFP Modules they are only sold in a pair.

UltraLAN Gigabit RJ45 SFP Module - 10/100/1000 Ethernet Module

The UltraLAN Copper Small Form Pluggable (SFP) transceivers are high performance, cost effective modules compliant with the Gigabit Ethernet and 1000BASE-T standards as specified in IEEE 802. 3-2002 and IEEE 802.3ab, which supports up to Gigabit data rates up to 100 meters in distance over unshielded twisted-pair CAT5 cabling.


The module supports 1000Mbps (or 10/100/1000Mbps) full duplex data-links with 5-level Pulse Amplitude Modulation (PAM) signals. All four pairs in the cable are used with symbol rate at 250Mbps on each pair.

This SFP module is compatible with all vendor devices that has an SFP slot.

Product Features:

Gigabit bi-directional data links
Compact RJ-45 connector
Hot pluggable SFP footprint
1 Gigabit Ethernet over CAT5 cable
Applicable for 100m distance transmission
Low power consumption, < 1.2W
Access to physical layer IC via 2-wire serial bus

UltraLAN SFP Module - Single Mode 1.25G 20KM 1310nm

UltraLAN SFP transceivers are high performance, cost effective modules supporting dual data-rate of 1.25Gbps/1.0625Gbps and 20km transmission distance with SMF.

The transceiver consists of three sections: a FP laser transmitter, a PIN photodiode integrated with a trans-impedance preamplifier (TIA) and MCU control unit. All modules satisfy class I laser safety requirements.The transceivers are compatible with SFP Multi-Source Agreement (MSA) and SFF-8472. For further information, please refer to SFP MSA.
Product Features:

Supports 1.25Gbps/1.0625Gbps bit rates
Duplex LC connector
Hot pluggable SFP footprint
1310nm FP laser transmitter and PIN photo-detector
Applicable for 20Km SMF connection
Low power consumption, < 0.8W
Digital Diagnostic Monitor Interface
Compliant with SFP MSA and SFF-8472
Very low EMI and excellent ESD protection

UltraLAN SFP Module - Single Mode 1.25G 10KM 1310nm

UltraLAN SFP transceivers are high performance, cost effective modules supporting dual data-rate of 1.25Gbps/1.0625Gbps and 10km transmission distance with SMF.

The transceiver consists of three sections: a FP laser transmitter, a PIN photodiode integrated with a trans-impedance preamplifier (TIA) and MCU control unit. All modules satisfy class I laser safety requirements.The transceivers are compatible with SFP Multi-Source Agreement (MSA) and SFF-8472. For further information, please refer to SFP MSA.

Product Features:

Supports 1.25Gbps/1.0625Gbps bit rates
Duplex LC connector
Hot pluggable SFP footprint
1310nm FP laser transmitter and PIN photo-detector
Applicable for 10Km SMF connection
Low power consumption, < 0.8W
Digital Diagnostic Monitor Interface
Compliant with SFP MSA and SFF-8472
Very low EMI and excellent ESD protection
Very low EMI and excellent ESD protection

UltraLAN SFP Module - Multimode 1.25G 500m 850nm


The UltraLAN SFP transceivers are high performance, cost effective modules supporting data-rate of 1.25Gbps and 550m transmission distance with MMF.

The transceiver consists of three sections: a VCSEL laser transmitter, a PIN photodiode integrated with a trans-impedance preamplifier (TIA) and MCU control unit. All modules satisfy class I laser safety requirements.The transceivers are compatible with SFP Multi-Source Agreement (MSA) and SFF-8472.

Product Features:

Supports 1.25Gbps/1.0625Gbps bit rates
Duplex LC connector
Hot pluggable SFP footprint
850nm VSCEL laser transmitter and PIN photo-detector
Applicable for 500m on 50/125µm, 300m on 62.5/125µm MMF connection
Low power consumption, < 0.5W
Digital Diagnostic Monitor Interface
Compliant with SFP MSA and SFF-8472
Very low EMI and excellent ESD protection

UltraLAN SFP BiDi Module Pair - SM 3KM 1310/1510nm

UltraLAN's SFP-BIDI transceivers are high performance, cost effective modules supporting dual data-rate of 1.25Gbps/1.0625Gbps and 3km transmission distance with SMF.


The transceiver consists of three sections: a FP/DFB laser transmitter, a PIN photodiode integrated with a trans-impedance preamplifier (TIA) and MCU control unit. All modules satisfy class I laser safety requirements. The transceivers are compatible with SFP Multi-Source Agreement (MSA) and SFF-8472.

Product Features:

Supports 1.25Gbps/1.0625Gbps bit rates
Bi-Directional LC connector
Hot pluggable SFP footprint
Applicable for 3KM SMF connection
Low power consumption, < 0.8W
Digital Diagnostic Monitor Interface
Compliant with SFP MSA and SFF-8472
Very low EMI and excellent ESD protection

Please note, as these are BiDi SFP Modules they are only sold in a pair.

UltraLAN SFP BiDi Module Pair - SM 20KM 1310/1510nm


UltraLAN's SFP-BIDI transceivers are high performance, cost effective modules supporting dual data-rate of 1.25Gbps/1.0625Gbps and 20km transmission distance with SMF.

The transceiver consists of three sections: a FP/DFB laser transmitter, a PIN photodiode integrated with a trans-impedance preamplifier (TIA) and MCU control unit. All modules satisfy class I laser safety requirements. The transceivers are compatible with SFP Multi-Source Agreement (MSA) and SFF-8472.

Product Features:
Supports 1.25Gbps/1.0625Gbps bit rates
Bi-Directional LC connector
Hot pluggable SFP footprint
Applicable for 20Km SMF connection
Low power consumption, < 0.8W
Digital Diagnostic Monitor Interface
Compliant with SFP MSA and SFF-8472
Very low EMI and excellent ESD protection

Please note, as these are BiDi SFP Modules they are only sold in a pair.